Forum Replies Created
June 17, 2010 at 7:00 pm in reply to: Unable to pass traffic after manual disable then re-enable. #50462
I removed the static route entries and added them back and traffic is passing again. So even though the gui showed the statics they weren’t in the table?
Thanks for the quick response. You are always helpful to everyone.
Can anyone recommend a good higher end machine for the main office in the above scenario?
I’d prefer no moving parts, fans, etc.. but will probably have to at leave have a CPU fan.
Very good. Just what I was looking for. I have my first 2 5501 units that I’m starting to setup and test.
Thanks for the reply.
Can anybody give me a quick yes or no on the Soekris for what I am trying to do?
Do I need more horsepower?
Ok will do. I’ll see what I can come up with. I was able to bridge vpn – eth00 and everything worked ok but I don’t want all the broadcast traffic that this seems to include. I’ll change the subnets are you suggested and will post my results.
I’ll answer my own question.
I completely didn’t notice the NET button on the vpn client section. I changed that to reflect only what I wanted to tunnel and now all is good.