Nickman

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: Zeroshell on HDD 10 Steps (beer included) !!! #45313
    Nickman
    Member

    I did what you said but all i get is a GRUB. Any ideas?

    in reply to: install iptraf into zeroshell #45396
    Nickman
    Member

    Can i beg for a additional future please? I wouldlike to be have an option to install Zeroshell in my hard drive. For us, Linux newbies could be very handy an option in web interface to install Zeroshell in one of our hard drives.

    Nick.

    in reply to: Noob question for network/routing #45357
    Nickman
    Member

    After some searching here and there i make it works. All i had to add was the 127.0.0.0 in routing table.
    But now i have a greater problem. How can i route my packets according to class (ftp, http, voip, gaming ports, p2p) to a different nic for each class?
    I made some rules in QoS but as long as the gw has the same ip, every packet goes through eth01

    Here is my entries on classifier
    ================================================
    1 ETH00 ETH01 MARK tcp opt — in ETH00 out ETH01 0.0.0.0/0 -> 0.0.0.0/0 PHYSDEV match ! –physdev-is-bridged source IP range 192.168.100.0-192.168.100.100 state NEW,RELATED,ESTABLISHED,UNTRACKED LAYER7 l7proto http tcp spt:80 dpt:80 MARK set 0xc SURFING no
    2 ETH00 ETH02 MARK tcp opt — in ETH00 out ETH02 0.0.0.0/0 -> 0.0.0.0/0 source IP range 192.168.100.0-192.168.100.100 state INVALID,NEW,RELATED,ESTABLISHED,UNTRACKED LAYER7 l7proto http-dap MARK set 0xb DOWNLOADS no
    3 ETH00 ETH02 MARK tcp opt — in ETH00 out ETH02 0.0.0.0/0 -> 195.220.94.166 source IP range 192.168.100.0-192.168.100.100 state NEW,RELATED,ESTABLISHED,UNTRACKED LAYER7 l7proto ftp tcp spt:21 dpt:21 MARK set 0xb DOWNLOADS no
    4 ETH00 ETH01 MARK udp opt — in ETH00 out ETH01 0.0.0.0/0 -> 0.0.0.0/0 source IP range 192.168.100.0-192.168.100.100 state INVALID,NEW,RELATED,ESTABLISHED,UNTRACKED ipp2p v0.8.2 –kazaa –gnu –edk –dc –bit LAYER7 l7proto edonkey udp spts:2000:3000 dpts:4000:5000 MARK set 0xd P2P no
    5 ETH00 ETH02 MARK tcp opt — in ETH00 out ETH02 0.0.0.0/0 -> 0.0.0.0/0 source IP range 192.168.100.0-192.168.100.100 state INVALID,NEW,RELATED,ESTABLISHED,UNTRACKED ipp2p v0.8.2 –kazaa –gnu –edk –dc –bit LAYER7 l7proto edonkey tcp spts:2000:3000 dpts:4000:5000 MARK set 0xd P2P no
    6 ETH00 ETH01 MARK tcp opt — in ETH00 out ETH01 0.0.0.0/0 -> 0.0.0.0/0 source IP range 192.168.100.0-192.168.100.100 destination IP range 87.237.38.200-87.238.38.200 state INVALID,NEW,RELATED,ESTABLISHED,UNTRACKED tcp spt:26000 dpt:26000 MARK set 0xe GAMING no
    7 ETH00 ETH01 MARK tcp opt — in ETH00 out ETH01 0.0.0.0/0 -> 0.0.0.0/0 source IP range 192.168.100.0-192.168.100.100 state NEW,RELATED,ESTABLISHED,UNTRACKED LAYER7 l7proto http tcp spt:80 dpt:80 MARK set 0xc SURFING no
    8 ETH00 ETH01 MARK tcp opt — in ETH00 out ETH01 0.0.0.0/0 -> 66.162.28.88 source IP range 192.168.100.0-192.168.100.100 tcp spt:4010 dpt:4010 MARK set 0xe GAMING no
    ================================================
    Any idea on this?

    Thanks in advance

Viewing 3 posts - 1 through 3 (of 3 total)