Forum Replies Created
-
AuthorPosts
-
marcegio
MemberA very strange situation is:
With previos mentioned / listed configuration from network 1 192.168.0.0/24 actually it possible to ping either ZSHLL 2 and, inside the network 2, 192.168.2.3 but not the other ones !!!!
This is a NAS disk equal to an other present at 192.168.2.2 but this is not pingable or browsable.
?????
Thank for anu suggestion or help.
Marcello
PS from site 2 no address are pingable,
marcegio
MemberIf as NAT you intend the set to do in the following menu (using GUI)
ROUTER -> NAT
Available Interfaces NAT Enabled Interfaces
ETH0 ETH1
VPN99 VPN00According to VPN Guide issued on Zeroshell Document area.
If I have correctly understood your hint, do you suggetst to modify what above al belove:
Available Interfaces NAT Enabled Interfaces
ETH0 ETH1
VPN
VPN99It is Correct ? Thank you so much.
Marcello
marcegio
MemberAccording to your notes and to be more exact, here you can find the settings:
ZSHLL site 1 eth0 192.168.0.223/255.255.255.0
eth1 XXX.XXX.XXX.XXX
VPN 20.20.20.1/255.255.255.0 ServerZSHLL site 2 eth0 192.168.2.223/255.255.255.0
eth1 YYY.YYY.YYY.YYY
VPN 20.20.20.2/255.255.255.0 Clientand this is the routing rule on ZSHLL 1
The rules on ZSHLL 2 are the same but reverse as
Destination Gateway Genmask Flags Metric Ref Use Iface
88.61.158.80 0.0.0.0 255.255.255.240 U 0 0 0 ETH01
192.168.2.0 20.20.20.2 255.255.255.0 UG 0 0 0 VPN00
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 ETH00
20.20.20.0 0.0.0.0 255.255.255.0 U 0 0 0 VPN00
0.0.0.0 88.61.158.81 0.0.0.0 UG 0 0 0 ETH01Thanks for any suggestion or correction.
Marcello
marcegio
MemberI forgot to say that if sometime from Site 1 it is possible to browse the Site 2 netword, it is not possible to browse from Site 2 to Site 1.
Never !
Thanks a lot.
Marcello
marcegio
MemberC’è nessuno che mi sappia dare un aiuto ?
Grazie anticipatamente.
Marcello
-
AuthorPosts