imported_fulvio

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 1,023 total)
  • Author
    Posts
  • in reply to: How to create a basic LAN to LAN VPN with Zeroshell? #54649
    imported_fulvio
    Participant

    Hi,
    if the goal is to use also the same DHCP server in the second office that you are using in the main one then you have to use a VPN bridged solution. In other words you do not require static routes to forward the traffic on the VPN but instead you should put in the same bridge the LAN interface and the VPN endpoint. You need to configure this bridge on both the offices. In any case, sharing the dhcp server has the disadvantage all your client use the same default gateway and therefore also Internet traffic would be forwarded from the second office to the main one.
    Regards
    Fulvio

    in reply to: Zeroshell 3.8.1 VPN problem #54636
    imported_fulvio
    Participant

    Thanks for making these tests. Really the slow performance of VPN bonding is due to packet reordering.
    I hope to look at this issue soon.

    Regards
    Fulvio

    in reply to: Zeroshell 3.8.1 VPN problem #54633
    imported_fulvio
    Participant

    Could you try if the issues you reported are solved by the new bug fix #00 applied to Zeroshell 3.8.1?

    Thanks
    Fulvio

    in reply to: Zeroshell for Raspberry Pi and Orange Pi #54449
    imported_fulvio
    Participant

    Hi,

    I am investigating about the possibility to migrate to Kernel 4.13.x for Orange Pi platform.
    I notice that other distributions already work with this more recent kernel so it should appear to be possible but I have no idea how long time it could take this step.

    Regards
    Fulvio

    in reply to: 3.8.1 upgrade broke nDPI #54626
    imported_fulvio
    Participant

    Could you try with a fresh installation?
    Regards
    Fulvio

    in reply to: [FIXED] the (monitoring) message spooler not sending emails #54561
    imported_fulvio
    Participant

    Hi,
    many thanks for the contribute. I am going to integrate the fix in the 3.8.1 release.
    Please let me know if I have only to add

    TS=”${TS%%_}”

    without
    the base 10 conversion.

    Regards
    Fulvio

    in reply to: Zeroshell for Raspberry Pi and Orange Pi #54441
    imported_fulvio
    Participant

    Hi,
    the Orange Pi Zero, Plus/Plus2 and PC will be supported in the future.

    Regards
    Fulvio

    in reply to: (Bug?) Zeroshell upgrade 3.6.0>3.7.0 OpenVPN X509+passwor #54316
    imported_fulvio
    Participant

    Hi,
    due to the way which the new OpenSSL create the hash of the certificates (MD5 -> SHA1) the Trusted CAs signing the certificates authorized to the X.509 access for VPN and captive portal services have to be flagged again.
    Sorry for the inconvenient.
    Regards
    Fulvio

    in reply to: Priority vs DSCP #54217
    imported_fulvio
    Participant

    Really I have not test if the Linux Kernel when forwarding packets look at the DSCP field. You should set an environment for testing.
    Regards
    Fulvio

    imported_fulvio
    Participant

    Last Zeroshell releases better use multicores system by distributing hardware interrupts on all cores. This result in a lower system load. In addition the last releases report in the system load graphic the value LOADAVG/CORES*100 and not LOADAVG*100 as in the past. In any case, your system load graphics is strange because the graphic is too uniform. Probably something is not working correctly in MRTG.
    Regards
    Fulvio

    in reply to: New Zeroshell 3.4.0 #53891
    imported_fulvio
    Participant

    Probably the download is not correctly terminated. You should restart with the other slot containing tha 3.3.2, remove the upgrade package and try again.
    Regards
    Fulvio

    in reply to: PPPOE #52618
    imported_fulvio
    Participant

    Hi,
    for the release 3.3.2 it is available a fix into repository.
    Regards
    Fulvio

    in reply to: Serious Vulnerability and new release #53687
    imported_fulvio
    Participant

    By default Zeroshell 3.3.2 start with a 32-bit kernel that can be replaced with a 64-bit version.

    Regards
    Fulvio

    in reply to: Glibc GHOST Vulnerability ? #53671
    imported_fulvio
    Participant

    Yes, it is vulnerable. I’m working to solve the issue.
    Regards
    Fulvio

    in reply to: Installing GCC and Python on Zeroshell? #53662
    imported_fulvio
    Participant

    Hi,
    you should do something as described in this link:

    https://www.zeroshell.org/forum/viewtopic.php?t=1500

    Regards
    Fulvio

Viewing 15 posts - 1 through 15 (of 1,023 total)