vcp_ai

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • in reply to: New release 2.0.RC1 #52397

    vcp_ai
    Member

    @krok wrote:

    Thanks fulvio, i test it and it works very good

    Test with proxmox (KVM) with HDD virtio and NET virtio.

    Could you please explain your proxmox config ?
    – Have you dedicated lan cards for zeroshell ?
    – What is your host network config ?

    Regards

    vicente

    in reply to: im getting this when im trying to add a virtual server port #45393

    vcp_ai
    Member

    I’m having same problem, trying to add a new Virtual Server.
    Message appears on main page:
    Feb 11 21:18,41 ERROR: mkdir: cannot create directory _/var/register/system/net/router/PAT/32′: Read-only file system/root/kerbynet.c…

    My release is 1.0 Beta13

    Results of commands are :
    root@zeroshell root> mount
    /dev/ram2 on / type ext2 (rw)
    proc on /proc type proc (rw)
    /dev/sda2 on /cdrom type iso9660 (ro)
    none on /sys type sysfs (rw)
    devpts on /dev/pts type devpts (rw,gid=4,mode=620)
    shm on /dev/shm type tmpfs (rw)
    usbfs on /proc/bus/usb type usbfs (rw)
    /dev/sda1 on /boot type ext2 (ro)
    /udev/sda3 on /DB type ext3 (rw,noatime)
    /DB/_DB.002 on /Database type none (rw,bind,noatime)
    root@zeroshell root>

    root@zeroshell root> ls -l /var/register
    lrwxrwxrwx 1 root root 23 Jul 3 2010 /var/register -> /Database/var/register/
    root@zeroshell root>

    I’m working from a USB stick.

    I’ve not rebooted recently the system, bu remenber to do it 2 or 3 times after migration from Beta12 to Beta 13….
    System is on a remote site, and I do not like to reboot without been in front of the box….

    I have 20 Virtual Servers, and they were imported form my previous 1.0Beta12 Release. It is the first time from migration from Beta12 to Beta13, that I try to add a new Virtual Server.

    Best Regards

    Vicente

    in reply to: saving config #47834

    vcp_ai
    Member

    @giancagianca wrote:

    On default profile you cannot save configuration.

    You must create a profile to save configuration… ….

    That seems to point the answer. I thougth that after making changes to profile, you should create a new profile to save them. I did not noticed that every change you do to ‘Active’ profile is automatically saved, I.E. you do NOT need to create a new profile to save changes.

    It looks like when you create a new profile only information related to ETH00 is saved.

    So if you want to have ‘incremental’ backups, and/or have a copy of your current profile before doing some changes, you have to:

      1. Create a copy of current (Active) Profile. You get a new _DBXXX profile.
      2. Activate this new created Profile.
      3. Make desired chages on this Profile.
      4. If you do not like your changes, you can go back to profile on step 1.

    Please confirm…

    Regards
    Vicente

    in reply to: saving config #47832

    vcp_ai
    Member

    Did you find a solution for your problem?

    I have same problem on 1.0.beta12. Running from live-cd and saving images to usb …

    Config for ETH00, pasword , is saved correct.
    Config for ETH01, IP, NAT, Router, DHCP is NOT saved..

    I’m using fixed IP for ETH01.

    Both ETH cards (main borad and PCI) are recognized as :
    Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

    Regards

Viewing 4 posts - 1 through 4 (of 4 total)