shah

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • in reply to: Radius Server & Captive Portal Login settings? #46501

    shah
    Member

    I finally able to create the ETH01, however I can’t add ip within the same range of ETH00.

    in reply to: RADIUS and MAC Address authentication #46518

    shah
    Member

    sbrown… how’s with your settings… is it work for you… need to know how you did it… πŸ˜‰

    in reply to: Radius Server & Captive Portal Login settings? #46499

    shah
    Member

    Thanks for the fast reply fulvio, my server is a window server, and virtual zeroshell is in this server. I have 2 ethernet cards on the server(192.168.1.2), which is being connected to the router (192.168.1.1). The other ethernet card is not in use.

    In the zeroshell image I downloaded only provide me ETH00 and VPN99. Correct me if I’m wrong, ETH00 is set on 192.168.1.75 where VPN99 i think is a bridge mode for the virtual server.

    Do I add another bridge in the zeroshell? Can I bridge VPN99 or can I add the interface in the VMX file.

    in reply to: Radius Server & Captive Portal Login settings? #46497

    shah
    Member

    How to make 2 bridge where i only have 2 connection that is ETH00 & VPN99. πŸ˜€

Viewing 4 posts - 1 through 4 (of 4 total)