radivtech

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • in reply to: Zeroshell as Firewall cum router #53908

    radivtech
    Member

    Apologies guys , for the late response , I appreciate the help and I would upload the profile of the Zs , so the you can try to simulate the similar condition and help me unlock the VLAN routes.

    in reply to: Zeroshell as Firewall cum router #53904

    radivtech
    Member

    Yes, the WAN interface of the ZS has NAT enabled.
    But , please suggest me why the routing for VLANs is not happening, why in the error, it is clearly mentioning that cannot be routed by routers.

    in reply to: Zeroshell as Firewall cum router #53903

    radivtech
    Member

    Yes, the WAN interface of the ZS has NAT enabled.
    But , please suggest me why the routing for VLANs is not happening, why in the error, it is clearly mentioning that cannot be routed by routers.

    in reply to: Zeroshell as Firewall cum router #53901

    radivtech
    Member

    I have tried the static routes as suggested , but the problem persists.

    The PC with IP 172.22.150.190 is able to ping the Zs with IP 172.22.128.2 but not able to access the WAN gateway 10.10.10.1 and when I did the Check IP.

    I got the ARP error,
    WARNING : the host 172.22.150.190 is not directly connected on the Eth01 but is reachable via the gateway 172.22.128.1 ( Core Switch). ARP Protocol is a Layer 2 Protocol and it cannot be routed by routers.

    Please suggest ,
    I guess its a routing issue, whether RIP shall be enabled.

    in reply to: Zeroshell as Firewall cum router #53900

    radivtech
    Member

    Thanks , Let me try this.

Viewing 5 posts - 1 through 5 (of 5 total)