r1vver

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 16 total)
  • Author
    Posts
  • in reply to: Zeroshel and Parallel Port ( modules wanted ) #64921

    r1vver
    Participant

    Nevermind, looks like LEDs are working without any additional modules.

    in reply to: tz database outdated #64809

    r1vver
    Participant

    …bump
    Zeroshell version 3.9.1
    and still outdated tzdata (zoneinfo)

    Please, for God’s sake, update tzdata (zoneinfo) !
    Per favore, per l’amor di Dio, aggiorna tzdata (zoneinfo) !

    in reply to: NEW Release ZS 3.91 for X86-64 and Raspberry #64808

    r1vver
    Participant

    …waiting for x86 iso/image…
    Btw, can anyone check if tzdata is still ancient outdated version in 3.91?

    in reply to: 3.9.0 experience – http failures #64325

    r1vver
    Participant

    can anyone also check https://www.7-zip.org ?
    I have failures to open site from behind ZS 3.9 and ZS 3.7.1
    no proxy and no virus checking enabled, etc
    DNS are also google ones.

    in reply to: [WANTED] pcspkr.ko 4.4.39-ZS x86 #54368

    r1vver
    Participant

    Thank you.

    in reply to: Development Environment (gcc, g++ and header files) #54254

    r1vver
    Participant

    it’s for subscribers only? 😥

    in reply to: Sun QFE – slot binding and mac setting #53949

    r1vver
    Participant

    nevermind, it’s need to be modprobe.blacklist=sunhme 😀

    And finally problem#1 is kinda solved:
    1. add modprobe.blacklist=sunhme to /grub/grub.cfg on first partition
    2. create file /Database/modprobe.d/sunhme.conf with content:
    options sunhme macaddr=0x00,0x03,0xba,0xa1,0xb1,0xc1
    3. add to preboot:
    cp /Database/modprobe.d/sunhme.conf /etc/modprobe.d/
    modprobe sunhme

    ugly, but kinda working 😳

    in reply to: Sun QFE – slot binding and mac setting #53948

    r1vver
    Participant

    ok, how to prevent module sunhme loading?
    I edited /grub/grub.cfg on first partition (like here https://www.zeroshell.org/forum/viewtopic.php?p=13917#13917 ) so now it’s

    root@zeroshell ~> cat /proc/cmdline
    BOOT_IMAGE=/1/3.18.21-ZS/vmlinuz root=HD=ZS-EA26E021_3.4.0_1 quiet rdblacklist=sunhme

    but sunhme is still loading 😥

    in reply to: Serious Vulnerability and new release #53689

    r1vver
    Participant

    and no img.gz again 🙁

    in reply to: Raspberry Pi build? #53598

    r1vver
    Participant

    that’s why my “answer” was started with word “lol” =)
    And with only 1 ethernet port and 2 (or 4) usb ports i do not think that raspberry is suitable device for zeroshell
    For simple wifi AP/router toy for home use there is openwrt for raspberry afair

    in reply to: Raspberry Pi build? #53596

    r1vver
    Participant

    lol
    take the sources and compile it already by yourself =)

    in reply to: ZeroShell-3.2.1-USB.img.gz ? #53541

    r1vver
    Participant

    3.2.1 img wanted 😳

    in reply to: Zeroshell 3.1.0 available #53373

    r1vver
    Participant

    I do not see Package 30300 “High Performance Firewall, QoS and NAT Router” in list of Available Packages in ZS 3.1.0 fresh installation.
    Does it mean that this feature is already by default included in ZS 3.1.0 fresh installation?

    in reply to: How to add a program to zeroshell that survives a reboot? #51928

    r1vver
    Participant

    There is the way to store files in /Database directory (here files can survive reboot) and copy them to place where they are need to be via Post Boot script in Startup/Cron section in web-interface.
    For example in my case i store udpxy binary and udpxy-startscript in /Database/udpxy/ and every boot system copy udpxy binary to /bin and run udpxystart.sh script:

    Code:
    # Startup Script
    cp /Database/udpxy/udpxy /bin
    sh /Database/udpxy/udpxystart.sh
    in reply to: IGMP-Proxy for IPTV #47671

    r1vver
    Participant

    Is this feature implemented in Zeroshell since then, or it need to be installed separately?
    Updated: Is it possible to make “igmpproxy mod” similar to mods on http://0sh-mods.net/ ?
    Updated: Compiled it, “installed” it and run it on my ZeroShell 1.0.beta12 box (P-III 500Mhz / 256Mb / 2 x Realtek 8139C + TP-Link TL-WN350GD). Processor load at 100% (via top) (and up to 160% via graphic statistics window).
    So, udpxy (udp->http IPTV proxy) is my choice after it (since i need to watch IPTV on only one computer in LAN). Processor load maximum up to 20%.

Viewing 15 posts - 1 through 15 (of 16 total)