oshanrube

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: connect to an external openvpn #54335

    oshanrube
    Member

    @plastun wrote:

    Press “Show Log” to see the error.

    thanks, i managed to connect to the VPN, but it doesnt seem to tunnel internet to the net balancer interfaces, i even added a gateway with the interface,

    04:58:19 (TEST) GATEWAY : slt4g (192.168.1.2)
    04:58:23 (TEST) => [216.58.194.174] : ERROR
    04:58:23 (TEST) GATEWAY : slt adsl (192.168.1.1)
    04:58:27 (TEST) => [216.58.194.174] : ERROR
    04:58:27 (TEST) GATEWAY : VPN (VPN00)
    04:58:31 (TEST) => [216.58.194.174] : ERROR

    the routing table looks abit wierd
    Destination Netmask Type Metric Gateway Interface Flags State Source
    0.0.0.0 128.0.0.0 Net 0 206.123.154.97 tun0 UG Up Auto
    DEFAULT GATEWAY 0.0.0.0 Net 0 none VPN00 U Up Auto
    128.0.0.0 128.0.0.0 Net 0 206.123.154.97 tun0 UG Up Auto
    192.168.1.0 255.255.255.0 Net 0 none ETH00 U Up Auto
    206.123.154.4 255.255.255.255 Host 0 192.168.1.1 ETH00 UGH Up Auto
    206.123.154.96 255.255.255.224 Net 0 none tun0 U Up Auto

    in reply to: connect to an external openvpn #54333

    oshanrube
    Member

    thank you very much for the details explanation, how ever icant seem to enter the X.509 authentication since pure vpn provides tls-auth and also the –pull seems to be a –float, is that alright?

    in reply to: connect to an external openvpn #54331

    oshanrube
    Member

    @plastun wrote:

    @oshanrube wrote:

    can i connect to a external vpn provider?

    Yes
    – whats the best way? lan-to-lan? in that case its only allowing certificate based autherntication and now user:password auth, what can i do about this

    and nat forward from that?

    yes

    i tried using the cli to connect but it doesnt seem to share the connection with the gateway’d pcs.

    what pcs? – the computers using the zeroshell as the gateway

    im trying to connect with pureVPN via openvpn

    maybe, probably yes, show config, that you have PureVPN

    – u was using shell commands and use the .ovpn file, how can i use this file with the web interface?

Viewing 3 posts - 1 through 3 (of 3 total)