Forum Replies Created
thanks for you answer, the addrees of the bond is a typo error, sorry them are 192.168.0.1 and 2!
So seems you are using 2 ZS boxes but over only one line? or you have 2 lines on the other side too? I think this is the reason.
this is my testbed:
client side (Zeroshell):
VPN00 (public ip server)
+ ---> PPP0
VPN01 (public ip server)
+ ---> PPP1
server side (Centos 5 Open VPN server):
eth0 (public ip)
seem work but very slooooow someting like 10kB/s.
may be is because the server have only ONE pubblic IP?
thanks for your help
I have the same problem but with UMTS modems, I think the problem is that one side have only one IP , I am waiting to get from my provider to try.
In the mean time let me know if there are some news about
sorry I sent you a wrong screenshot.
But in the mean time I made some test and I discover that the problem is that I am not using 2 zeroshell box but in one side I am using a dedicate server with a single IP even with 2 vpns bonded.
So I have now to order a multi ip from my provider before give up!
I will keep you informed, but I am still interested in your configuration (if is really working)
Many thanks for now
I have the same problem , some news?
I am trying to make a link aggregation (layer 2) with zeroshell without success.
The problem is that only ONE gateway is used at time (seem like connection based balancing) NO BALANCING occurs. I have followed the guide exactly.
Seem you have found the way. May you show me your configuration and a map of your hardware setup?
Thanks a lot in advance!