marcegio

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • in reply to: ZeroShell VPN Lan to Lan malfunction #51822

    marcegio
    Member

    A very strange situation is:

    With previos mentioned / listed configuration from network 1 192.168.0.0/24 actually it possible to ping either ZSHLL 2 and, inside the network 2, 192.168.2.3 but not the other ones !!!!

    This is a NAS disk equal to an other present at 192.168.2.2 but this is not pingable or browsable.

    ?????

    Thank for anu suggestion or help.

    Marcello

    PS from site 2 no address are pingable,

    in reply to: ZeroShell VPN Lan to Lan malfunction #51821

    marcegio
    Member

    If as NAT you intend the set to do in the following menu (using GUI)

    ROUTER -> NAT

    Available Interfaces NAT Enabled Interfaces
    ETH0 ETH1
    VPN99 VPN00

    According to VPN Guide issued on Zeroshell Document area.

    If I have correctly understood your hint, do you suggetst to modify what above al belove:

    Available Interfaces NAT Enabled Interfaces
    ETH0 ETH1
    VPN
    VPN99

    It is Correct ? Thank you so much.

    Marcello

    in reply to: ZeroShell VPN Lan to Lan malfunction #51819

    marcegio
    Member

    According to your notes and to be more exact, here you can find the settings:

    ZSHLL site 1 eth0 192.168.0.223/255.255.255.0
    eth1 XXX.XXX.XXX.XXX
    VPN 20.20.20.1/255.255.255.0 Server

    ZSHLL site 2 eth0 192.168.2.223/255.255.255.0
    eth1 YYY.YYY.YYY.YYY
    VPN 20.20.20.2/255.255.255.0 Client

    and this is the routing rule on ZSHLL 1
    The rules on ZSHLL 2 are the same but reverse as
    Destination Gateway Genmask Flags Metric Ref Use Iface
    88.61.158.80 0.0.0.0 255.255.255.240 U 0 0 0 ETH01
    192.168.2.0 20.20.20.2 255.255.255.0 UG 0 0 0 VPN00
    192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 ETH00
    20.20.20.0 0.0.0.0 255.255.255.0 U 0 0 0 VPN00
    0.0.0.0 88.61.158.81 0.0.0.0 UG 0 0 0 ETH01

    Thanks for any suggestion or correction.

    Marcello

    in reply to: ZeroShell VPN Lan to Lan malfunction #51817

    marcegio
    Member

    I forgot to say that if sometime from Site 1 it is possible to browse the Site 2 netword, it is not possible to browse from Site 2 to Site 1.

    Never !

    Thanks a lot.

    Marcello


    marcegio
    Member

    C’√® nessuno che mi sappia dare un aiuto ?

    Grazie anticipatamente.

    Marcello

Viewing 5 posts - 1 through 5 (of 5 total)