Maklaut

Forum Replies Created

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • in reply to: New release 2.0.RC3 #52816

    Maklaut
    Member

    @corvinav wrote:

    Hi. How can i compile app for the rc3. For example igmpproxy. Or have another way to work iptv on zeroshell? Thanks.

    Gcc , binutils and other libs available in download section.
    I tried igmpproxy few weeks ago but it freeze my gw very hard. The udpxy works much better. I’m suggest to use udpxy.

    in reply to: QOS Layer7 in RC3 #52956

    Maklaut
    Member

    I’m just posted a bug report

    in reply to: Block Torrent on Zeroshell #52980

    Maklaut
    Member
    in reply to: New release 2.0.RC3 #52813

    Maklaut
    Member

    Seems what l7-filter does not work in 2.0RC3.
    As I see it begins from 2.0RC1

    Fulvio, which l7-filter kernel patch you are applied on 3.4.x kernel?

    upd: just posted a bug report

    in reply to: QOS Layer7 in RC3 #52955

    Maklaut
    Member

    I have the same problem with l7-filter on 2.0RC3.
    Look at iptables mangle table – only original iptables rules (direct ip/port) works:


    Chain QoS (1 references)
    pkts bytes target prot opt in out source destination
    957K 693M MARK all -- * * 0.0.0.0/0 0.0.0.0/0 MARK and 0x0
    0 0 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 LAYER7 l7proto bittorrent MARK set 0xc
    0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match ! 0x0
    0 0 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 LAYER7 l7proto edonkey MARK set 0xc
    0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match ! 0x0
    0 0 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 LAYER7 l7proto fasttrack MARK set 0xc
    0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match ! 0x0
    0 0 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 LAYER7 l7proto gnutella MARK set 0xc
    0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match ! 0x0
    0 0 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 LAYER7 l7proto directconnect MARK set 0xc
    0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match ! 0x0
    0 0 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 LAYER7 l7proto sip MARK set 0xb
    0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match ! 0x0
    0 0 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 LAYER7 l7proto rtp MARK set 0xb
    0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match ! 0x0
    0 0 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 LAYER7 l7proto rtsp MARK set 0xb
    0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match ! 0x0
    0 0 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 LAYER7 l7proto skypetoskype MARK set 0xb
    0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match ! 0x0
    0 0 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 LAYER7 l7proto skypeout MARK set 0xb
    0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match ! 0x0
    0 0 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 LAYER7 l7proto h323 MARK set 0xb
    0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match ! 0x0
    201 50280 MARK tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp spt:22 MARK set 0xd
    201 50280 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match ! 0x0
    0 0 MARK tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 MARK set 0xd
    0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match ! 0x0
    0 0 MARK tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp spt:23 MARK set 0xd
    0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match ! 0x0
    0 0 MARK tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:23 MARK set 0xd
    0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match ! 0x0
    0 0 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 LAYER7 l7proto ftp MARK set 0xe
    0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match ! 0x0
    6 3536 MARK all -- * * 77.72.169.0/24 0.0.0.0/0 MARK set 0xb
    6 3536 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match ! 0x0
    5 3557 MARK all -- * * 0.0.0.0/0 77.72.169.0/24 MARK set 0xb
    5 3557 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match ! 0x0
    850 170K MARK all -- * * 77.72.168.0/24 0.0.0.0/0 MARK set 0xb
    850 170K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match ! 0x0
    917 183K MARK all -- * * 0.0.0.0/0 77.72.168.0/24 MARK set 0xb
    917 183K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match ! 0x0
    in reply to: alternative to l7-filter? #52571

    Maklaut
    Member

    Oops, openDPI is dead – http://lastsummer.de/bye-bye-opendpi/
    nDPI seems to be a live fork of openDPI – http://www.ntop.org/products/ndpi/
    So, what about intergation of nDPI to Zeroshell?

    in reply to: alternative to l7-filter? #52570

    Maklaut
    Member

    Any news about openDPI integration in zeroshell?


    Maklaut
    Member

    Thank you very much!

Viewing 8 posts - 1 through 8 (of 8 total)