joe

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • in reply to: zeroshell as a wireless client help #47976

    joe
    Member

    The NAT was the KEy..

    After I added what looked like ETH02 (my wifi card) to the NAT everything fell into place..

    so for othere would be run your zeroshell as a wifi client goers out there..

    Release 1.0.beta11
    setup wifi from shell

    change your password to something you can use (you will need it alot)

    WiFi Manager
    then
    New SSID
    go through the particulars essid , encryption password all that…

    then head on over to the web interface at it looked like 192.168.0.75 but I changed mine to 10.0.0.1

    then specify IP address of AP as default gateway via menu [Setup]->[Router]. Also put Wireless interface of Zeroshell box into NAT list [Setup]->[Router]->[NAT].

    big thanks to vmv4

    in reply to: zeroshell as a wireless client help #47974

    joe
    Member

    anyone?

    is it not posible with this setup or and I missing a step..

    in reply to: internal forward for VoIP #47980

    joe
    Member

    did u allocate some rtp ports i usuall use 10000-21000 udp

    with sip 5060 is good for the call the ring but the actuall call conversation is done through rtp ports

    in reply to: zeroshell as a wireless client help #47973

    joe
    Member

    when I am done I am hoping to have
    Linksys
    internet wrt54gs zeroshell switch

    I notice when I click on the wireless part on the left menu I get
    “This version does not include the web interface support for the WiFi. To manage the Wireless devices you need to run the wifi-manager script from the console by using a serial, VGA or ssh session.”

    Is there web interface support for wifi yet?

Viewing 4 posts - 1 through 4 (of 4 total)