izilic

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 16 total)
  • Author
    Posts

  • izilic
    Member

    Thanks for your great contribution

    in reply to: New release #47008

    izilic
    Member

    Fulvio:

    Thanks for your reply.

    Best Regards,

    IAZS

    in reply to: New release #47006

    izilic
    Member

    Hi!

    I made the upgrade as mentioned earlier in this topic. Everything went fine. Thanks again for your help.

    Now I have another problem. How can I update the remote VPN servers I have?

    Best Regards.

    IAZS

    in reply to: New release #47004

    izilic
    Member

    Thanks for your help.

    I will try that this afternoon. I will post my results.

    Best Regards,

    IAZS

    in reply to: New release #47001

    izilic
    Member

    Fulvio:

    Its great to have this new release.

    I use zeroshell from a pendrive where i have zeroshell and the database. What would be the best procedure to upgrade to the last version?

    Thanks.

    IAZS

    in reply to: DMZ with multiple public IP´s #46986

    izilic
    Member

    Fulvio:

    Thanks for your answer. I will wait for the next release.

    One important thing. When using the multiple public ip’s definitions, it would be very impotant that outgoing trafic from one of the servers always uses the public IP it should.

    Thanks again.

    Best regards.

    IAZS

    in reply to: bug in havp 0.88, havp 0.89 released #46939

    izilic
    Member

    Fulvio, thanks for your answer. Any idea when the next zeroshell release will be available? Migrating from beta 10 to next release will be easy enough?

    Thanks.

    Ivan Zilic

    in reply to: QoS + VPN #46822

    izilic
    Member

    Fulvio:

    Thank you very much. This really helped me with the QoS.

    Best Regards,

    IAZS

    in reply to: Bandwidth monitoring for each IP Connect to internet #46791

    izilic
    Member

    Hi!!

    I am pretty new to ZS, but already making great things with it so i am very happy.

    In other linux servers/routers I have I use MRTG as monitoring tool for almost everything from bandwidth to cpu or hard drives tempetature.

    I think it could be nice to have MRTG in ZS.

    What do you think?

    Best Regards,

    IAZS

    in reply to: QoS + VPN #46820

    izilic
    Member

    Fulvio:

    Thank you very much for all your help and for bringing us the ZS project. Its just great.

    The company where I am using ZS wont give me budget for separate shaping boxes, so I have to do the best with the boxes I have now. As i have 5 VPN’s I am using 6 ZS boxes and using a separate box for shaping in each place I need shaping would mean 6 new boxes.

    I was thinking the following, if we could set the QoS in the POSTROUTING chain we could catch the traffic going to the LAN and to the internet from vpn and proxy + all the forwarded traffic. I think that would be the more precise way to apply QoS in any case where the same box does several tasks besides routing. What do you think?

    I have some questions. What should I modify so the QoS applies to the POSTROUTING chain as default?

    Where can I find the QoS rules stored in the database?

    Best Regards,

    IAZS

    in reply to: QoS + VPN #46818

    izilic
    Member

    Fulvio:

    Thanks again for your answer.

    How difficult could it be to add to the QOS Classifier a selector to put int input, output or forward chain the different rules just like in the firewall configuration screen?

    I think this would be the best solution as with one piece of hardware we could solve all the network needs, including the QoS for the proxy and for the VPN`s.

    Best regards,

    IAZS

    in reply to: QoS + VPN #46816

    izilic
    Member

    Fulvio:

    I was all this morning making tests.

    With the set up you sugested i did not capture any traffic.

    Then I made a rule:

    10 * ETH00 MARK tcp opt — in * out ETH00 0.0.0.0/0 -> 0.0.0.0/0 MARK set 0x10 OUTVPN1 yes

    And then I filtered the log using the IP Address from the remote VPN client (Internet IP) and had no results. As we were talking in another post about qos+proxy, I think the traffic for open VPN is not seen by the QOS clasifier at the Internet interface.

    I will continue making tests and, of course, i will post any results i get.

    I know that what i am trying here is not easy, but i am sure its a way to make it work.

    Thanks for allyour help.

    Best Regards,

    IAZS

    in reply to: QoS + VPN #46814

    izilic
    Member

    Fulvio:

    Thank you very much for your help.

    Today I will try these settings.

    I have a question, in my originl set up, rules 5 to 9 seem ok?

    Thanks again,

    IAZS

    in reply to: QoS + VPN #46812

    izilic
    Member

    Fulvio:

    Thanks for your answer. Here is the diagram. Any information you need, please ask me.

    [/img]

    in reply to: Filter the content of the web pages with DansGuardian #46447

    izilic
    Member

    I would like to know how to install dansgguardian in beta10

    best Regards,

    IAZS

Viewing 15 posts - 1 through 15 (of 16 total)