ckoeber

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: Captive Portal with Active Directory [RESOLVED] #51969

    ckoeber
    Member

    It turns out that what I did does work with the exception of a small subset of accounts I tried.

    Thank you for anyone who has taken time to look at this.

    Regards,
    Christopher Koeber

    in reply to: No MetadataProvider available. #51967

    ckoeber
    Member
    fulvio wrote:
    Are you sure you need to activate shibboleth for SAML authentication?
    Usually the captive portal has to be activated only with RADIUS/Kerberos authentication.

    Regards
    Fulvio

    You were right. Only Radius authentication was needed for the initial setup I needed.

    Thanks.

    in reply to: No MetadataProvider available. #51966

    ckoeber
    Member
    fulvio wrote:
    Are you sure you need to activate shibboleth for SAML authentication?
    Usually the captive portal has to be activated only with RADIUS/Kerberos authentication.

    Regards
    Fulvio

    Thank you for your reply.

    You might be right.

    Here is our scenario. I have an external OpenLDAP/Radius system with our accounts. People need to be in this system for access to our wireless network.

    So I plan to have the ZeroShell system sitting between the wireless network and the internet + other resources that wireless clients need.

    So, I thought I needed the Shibboleth authentication mechanism but I just need Radius with the proxy stuff set up, correct?

    Thanks.

Viewing 3 posts - 1 through 3 (of 3 total)