bakcsa

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: Connecting PUTTY Clients to Zeroshell SSH via Public Key #50315

    bakcsa
    Member

    I would like to do the same, but I don’t think that this post is still valid for ZS 3.4

    I have a central backup server which backups all my linux machine via ssh. It would be very good if I could integrate ZS with it. Could you please give me instructions?

    in reply to: Host to Lan problem #52531

    bakcsa
    Member

    Hi,

    I would like to migrate my openvpn server to zeroshell. I’m using zeroshell for a while, but wasn’t able to setup openvpn.

    The connection establishes every time, but the trafic cannot go through the tunnel. I cannot even ping the gateway.

    About the setup:
    I’m using the default values, except the port, which I modified from 1194 to 1195. It’s needed, bevouse there is a virtual server entry in zeroshel for 1194 which points to my old vpn server.
    Also, I have added the net in the “Client IP Address Assignment” section.
    My lan’s details are:
    ip:192.168.10.0
    subnet:255.255.255.0
    zeroshell ip: 192.168.10.1

    the net, which i added to the vpn is 192.168.10.0/255.255.255.0
    Source NAT is checked
    I didn’t modify anything on VPN99 adapter.
    I have a Bridge which consist of the LAN side NIC and the wireles adapter.
    Firewall: All chain default policy is ACCEPT, there is no special rule to DROP any packet.

    Do you have any idea, what could be behind of this? I really want to get rid of a separate vpn server since zeroshell supports vpn.

    Also, could you please tell me where can I found the server configuration file for openvpn? (i mean on the zeroshell file system) If I cannot make it work through the gui, I would try by hand.

    Thanks!

Viewing 2 posts - 1 through 2 (of 2 total)