ZS1.0b12 crashed

[AtroposXMember]

This is the first crash that has happened, using ZS1.0b12. Just all of a sudden after 105 days of uptime, i could not ping the management ports, and all traffic passing through the bridged interface halted.

CPU is a dual core 2.83 E8300, 3gigs of ram, using the dd method to a hard drive. It’s been up and running great, then stopped passing traffic. I do have an Interface Masters N2265 pci-express card, that I had to compile the driver on a dev. box to get the bypass feature working. I thought maybe it was that, but the seperate NIC for management even stopped responding.

Its not on a KVM, so i couldn’t get into the console at the time. But a reboot fixed the issue, waited for it to come up, then everything started working.

I got about 56 firewall rules, that are basic, this src ip, after this many connections, drop. I got about 24 classes on both interfaces and 58 classifiers, to create the up/download for the ips/subnets, and some misc qos rules. The ZS box does strictly QoS, no other DNS or anything else. It just happened this morning.

[AtroposXMember]

here’s from the log viewer – kernel section:
09:56:02 klogd 1.4.1, log source = /proc/kmsg started.
09:56:02 Cannot find map file.
09:56:02 No module symbols loaded – kernel modules not enabled.
09:56:02 cannot find any symbols, turning off symbol lookups
09:56:02 Linux version 2.6.25.20 (root@nexus.example.com) (gcc version 4.3.2 (GCC) ) #1 SMP Thu May 14 23:12:00 CEST 2009
09:56:02 BIOS-provided physical RAM map:
09:56:02 BIOS-e820: 0000000000000000 – 000000000009fc00 (usable)
09:56:02 BIOS-e820: 000000000009fc00 – 00000000000a0000 (reserved)
09:56:02 BIOS-e820: 00000000000e0000 – 0000000000100000 (reserved)
09:56:02 BIOS-e820: 0000000000100000 – 00000000bd9ea000 (usable)
09:56:02 BIOS-e820: 00000000bd9ea000 – 00000000bdabb000 (ACPI NVS)
09:56:02 BIOS-e820: 00000000bdabb000 – 00000000becc6000 (usable)
09:56:02 BIOS-e820: 00000000becc6000 – 00000000becc8000 (reserved)
09:56:02 BIOS-e820: 00000000becc8000 – 00000000bed8b000 (usable)
09:56:02 BIOS-e820: 00000000bed8b000 – 00000000bede5000 (ACPI NVS)
09:56:02 BIOS-e820: 00000000bede5000 – 00000000bede9000 (usable)
09:56:02 BIOS-e820: 00000000bede9000 – 00000000bedf2000 (ACPI data)
09:56:02 BIOS-e820: 00000000bedf2000 – 00000000bedf3000 (usable)
09:56:02 BIOS-e820: 00000000bedf3000 – 00000000bedff000 (ACPI data)
09:56:02 BIOS-e820: 00000000bedff000 – 00000000bee00000 (usable)
09:56:02 BIOS-e820: 00000000bee00000 – 00000000bf800000 (reserved)
09:56:02 BIOS-e820: 00000000f0000000 – 00000000f8000000 (reserved)
09:56:02 BIOS-e820: 00000000fff00000 – 0000000100000000 (reserved)
09:56:02 2158MB HIGHMEM available.
09:56:02 896MB LOWMEM available.
09:56:02 Scan SMP from c0000000 for 1024 bytes.
09:56:02 Scan SMP from c009fc00 for 1024 bytes.
09:56:02 Scan SMP from c00f0000 for 65536 bytes.
09:56:02 found SMP MP-table at [c00fe200] 000fe200
09:56:02 Entering add_active_range(0, 0, 781824) 0 entries of 256 used
09:56:02 Zone PFN ranges:
09:56:02 DMA 0 -> 4096
09:56:02 Normal 4096 -> 229376
09:56:02 HighMem 229376 -> 781824
09:56:02 Movable zone start PFN for each node
09:56:02 early_node_map[1] active PFN ranges
09:56:02 0: 0 -> 781824
09:56:02 On node 0 totalpages: 781824
09:56:02 DMA zone: 32 pages used for memmap
09:56:02 DMA zone: 0 pages reserved
09:56:02 DMA zone: 4064 pages, LIFO batch:0
09:56:02 Normal zone: 1760 pages used for memmap
09:56:02 Normal zone: 223520 pages, LIFO batch:31
09:56:02 HighMem zone: 4316 pages used for memmap
09:56:02 HighMem zone: 548132 pages, LIFO batch:31
09:56:02 Movable zone: 0 pages used for memmap
09:56:02 DMI 2.4 present.
09:56:02 ACPI: RSDP 000FE020, 0014 (r0 INTEL )
09:56:02 ACPI: RSDT BEDFD038, 0060 (r1 INTEL DG33FB 23C 1000013)
09:56:02 ACPI: FACP BEDFC000, 0074 (r1 INTEL DG33FB 23C MSFT 1000013)
09:56:02 ACPI: DSDT BEDF8000, 3DE9 (r1 INTEL DG33FB 23C MSFT 1000013)
09:56:02 ACPI: FACS BED96000, 0040
09:56:02 ACPI: APIC BEDF7000, 0078 (r1 INTEL DG33FB 23C MSFT 1000013)
09:56:02 ACPI: WDDT BEDF6000, 0040 (r1 INTEL DG33FB 23C MSFT 1000013)
09:56:02 ACPI: MCFG BEDF5000, 003C (r1 INTEL DG33FB 23C MSFT 1000013)
09:56:02 ACPI: ASF! BEDF4000, 00A6 (r32 INTEL DG33FB 23C MSFT 1000013)
09:56:02 ACPI: HPET BEDF3000, 0038 (r1 INTEL DG33FB 23C MSFT 1000013)
09:56:02 ACPI: ASPT BEDF1000, 0034 (r3 INTEL DG33FB 23C MSFT 1000013)
09:56:02 ACPI: WDTT BEDF0000, 02CC (r1 INTEL DG33FB 23C MSFT 1000013)
09:56:02 ACPI: SSDT BEDEF000, 0204 (r1 INTEL CpuPm 23C MSFT 1000013)
09:56:02 ACPI: SSDT BEDEE000, 01B7 (r1 INTEL Cpu0Ist 23C MSFT 1000013)
09:56:02 ACPI: SSDT BEDED000, 01B7 (r1 INTEL Cpu1Ist 23C MSFT 1000013)
09:56:02 ACPI: SSDT BEDEC000, 01CF (r1 INTEL Cpu0Cst 23C MSFT 1000013)
09:56:02 ACPI: SSDT BEDEB000, 01CF (r1 INTEL Cpu1Cst 23C MSFT 1000013)
09:56:02 ACPI: SSDT BEDEA000, 01CF (r1 INTEL Cpu2Cst 23C MSFT 1000013)
09:56:02 ACPI: SSDT BEDE9000, 01CF (r1 INTEL Cpu3Cst 23C MSFT 1000013)
09:56:02 ACPI: PM-Timer IO Port: 0x408
09:56:02 ACPI: Local APIC address 0xfee00000
09:56:02 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
09:56:02 Processor #0 7:7 APIC version 20
09:56:02 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
09:56:02 Processor #1 7:7 APIC version 20
09:56:02 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
09:56:02 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
09:56:02 ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
09:56:02 ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
09:56:02 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
09:56:02 IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
09:56:02 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
09:56:02 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
09:56:02 ACPI: IRQ0 used by override.
09:56:02 ACPI: IRQ2 used by override.
09:56:02 ACPI: IRQ9 used by override.
09:56:02 Enabling APIC mode: Flat. Using 1 I/O APICs
09:56:02 Using ACPI (MADT) for SMP configuration information
09:56:02 Allocating PCI resources starting at c0000000 (gap: bf800000:30800000)
09:56:02 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 775716
09:56:02 Kernel command line: ramdisk_size=131072 quiet
09:56:02 mapped APIC to ffffb000 (fee00000)
09:56:02 mapped IOAPIC to ffffa000 (fec00000)
09:56:02 Enabling fast FPU save and restore… done.
09:56:02 Enabling unmasked SIMD FPU exception support… done.
09:56:02 Initializing CPU#0
09:56:02 PID hash table entries: 4096 (order: 12, 16384 bytes)
09:56:02 Detected 2833.111 MHz processor.
09:56:02 Console: colour VGA+ 80×25
09:56:02 console [tty0] enabled
09:56:02 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
09:56:02 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
09:56:02 Memory: 3093596k/3127296k available (2449k kernel code, 31048k reserved, 1089k data, 260k init, 2208504k highmem)
09:56:02 Detected 2833.111 MHz processor.
09:56:02 Console: colour VGA+ 80×25
09:56:02 console [tty0] enabled
09:56:02 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
09:56:02 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
09:56:02 Memory: 3093596k/3127296k available (2449k kernel code, 31048k reserved, 1089k data, 260k init, 2208504k highmem)
09:56:02 virtual kernel memory layout:
09:56:02 fixmap : 0xffee4000 – 0xfffff000 (1132 kB)
09:56:02 pkmap : 0xff800000 – 0xffc00000 (4096 kB)
09:56:02 vmalloc : 0xf8800000 – 0xff7fe000 ( 111 MB)
09:56:02 lowmem : 0xc0000000 – 0xf8000000 ( 896 MB)
09:56:02 .init : 0xc047c000 – 0xc04bd000 ( 260 kB)
09:56:02 .data : 0xc03646fe – 0xc0474da0 (1089 kB)
09:56:02 .text : 0xc0100000 – 0xc03646fe (2449 kB)
09:56:02 Checking if this processor honours the WP bit even in supervisor mode…Ok.
09:56:02 CPA: page pool initialized 1 of 1 pages preallocated
09:56:02 Calibrating delay using timer specific routine.. 5670.07 BogoMIPS (lpj=11340156)
09:56:02 Mount-cache hash table entries: 512
09:56:02 CPU: L1 I cache: 32K, L1 D cache: 32K
09:56:02 CPU: L2 cache: 6144K
09:56:02 CPU: Physical Processor ID: 0
09:56:02 CPU: Processor Core ID: 0
09:56:02 using mwait in idle threads.
09:56:02 Compat vDSO mapped to ffffe000.
09:56:02 Checking ‘hlt’ instruction… OK.
09:56:02 Checking for popad bug… OK.
09:56:02 Freeing SMP alternatives: 13k freed
09:56:02 ACPI: Core revision 20070126
09:56:02 CPU0: Intel(R) Core(TM)2 Duo CPU E8300 @ 2.83GHz stepping 06
09:56:02 Booting processor 1/1 ip 2000
09:56:02 Initializing CPU#1
09:56:02 Calibrating delay using timer specific routine.. 5666.39 BogoMIPS (lpj=11332795)
09:56:02 CPU: L1 I cache: 32K, L1 D cache: 32K
09:56:02 CPU: L2 cache: 6144K
09:56:02 CPU: Physical Processor ID: 0
09:56:02 CPU: Processor Core ID: 1
09:56:02 CPU1: Intel(R) Core(TM)2 Duo CPU E8300 @ 2.83GHz stepping 06
09:56:02 Total of 2 processors activated (11336.47 BogoMIPS).
09:56:02 ENABLING IO-APIC IRQs
09:56:02 ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
09:56:02 checking TSC synchronization [CPU#0 -> CPU#1]: passed.
09:56:02 Brought up 2 CPUs
09:56:02 CPU0 attaching sched-domain:
09:56:02 domain 0: span 0003
09:56:02 groups: 0001 0002
09:56:02 CPU1 attaching sched-domain:
09:56:02 domain 0: span 0003
09:56:02 groups: 0002 0001
09:56:02 net_namespace: 452 bytes
09:56:02 NET: Registered protocol family 16
09:56:02 ACPI: bus type pci registered
09:56:02 PCI: Using MMCONFIG for extended config space
09:56:02 PCI: Using configuration type 1
09:56:02 Setting up standard PCI resources
09:56:02 ACPI: EC: Look up EC in DSDT
09:56:02 ACPI: Interpreter enabled
09:56:02 ACPI: (supports S0 S5)
09:56:02 ACPI: Using IOAPIC for interrupt routing
09:56:02 ACPI: PCI Root Bridge [PCI0] (0000:00)
09:56:02 pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
09:56:02 pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
09:56:02 PCI: Transparent bridge – 0000:00:1e.0
09:56:02 ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
09:56:02 ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P32_._PRT]
09:56:02 ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PEX0._PRT]
09:56:02 ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PEX1._PRT]
09:56:02 ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PEX2._PRT]
09:56:02 ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PEX3._PRT]
09:56:02 ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PEX4._PRT]
09:56:02 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
09:56:02 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
09:56:02 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
09:56:02 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
09:56:02 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
09:56:02 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12)
09:56:02 ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
09:56:02 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
09:56:02 Linux Plug and Play Support v0.97 (c) Adam Belay
09:56:02 pnp: PnP ACPI init
09:56:02 ACPI: bus type pnp registered
09:56:02 pnp: PnP ACPI: found 12 devices
09:56:02 ACPI: ACPI bus type pnp unregistered
09:56:02 SCSI subsystem initialized
09:56:02 usbcore: registered new interface driver usbfs
09:56:02 usbcore: registered new interface driver hub
09:56:02 usbcore: registered new device driver usb
09:56:02 PCI: Using ACPI for IRQ routing
09:56:02 PCI: If a device doesn’t work, try “pci=routeirq”. If it helps, post a report
09:56:02 system 00:01: iomem range 0xf0000000-0xf7ffffff could not be reserved
09:56:02 system 00:01: iomem range 0xfeb00000-0xfeb03fff has been reserved
09:56:02 system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
09:56:02 system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
09:56:02 system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
09:56:02 system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
09:56:02 system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
09:56:02 system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
09:56:02 system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
09:56:02 system 00:01: iomem range 0xc0000-0xdffff could not be reserved
09:56:02 system 00:01: iomem range 0xe0000-0xfffff could not be reserved
09:56:02 system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved
09:56:02 system 00:06: ioport range 0x500-0x53f has been reserved
09:56:02 system 00:06: ioport range 0x400-0x47f has been reserved
09:56:02 system 00:06: ioport range 0x680-0x6ff has been reserved
09:56:02 PCI: Bridge: 0000:00:01.0
09:56:02 IO window: 3000-3fff
09:56:02 MEM window: 0xd0300000-0xd03fffff
09:56:02 PREFETCH window: 0x00000000d0500000-0x00000000d05fffff
09:56:02 PCI: Bridge: 0000:00:1c.0
09:56:02 IO window: disabled.
09:56:02 MEM window: disabled.
09:56:02 PREFETCH window: disabled.
09:56:02 PCI: Bridge: 0000:00:1c.1
09:56:02 IO window: 2000-2fff
09:56:02 MEM window: 0xd0100000-0xd01fffff
09:56:02 PREFETCH window: disabled.
09:56:02 PCI: Bridge: 0000:00:1c.2
09:56:02 IO window: disabled.
09:56:02 MEM window: disabled.
09:56:02 PREFETCH window: disabled.
09:56:02 PCI: Bridge: 0000:00:1c.3
09:56:02 IO window: disabled.
09:56:02 MEM window: disabled.
09:56:02 PREFETCH window: disabled.
09:56:02 PCI: Bridge: 0000:00:1c.4
09:56:02 IO window: disabled.
09:56:02 MEM window: disabled.
09:56:02 PREFETCH window: disabled.
09:56:02 PCI: Bridge: 0000:00:1e.0
09:56:02 IO window: 1000-1fff
09:56:02 MEM window: 0xd0000000-0xd00fffff
09:56:02 PREFETCH window: 0x00000000d0600000-0x00000000d06fffff
09:56:02 ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
09:56:02 PCI: Setting latency timer of device 0000:00:01.0 to 64
09:56:02 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
09:56:02 PCI: Setting latency timer of device 0000:00:1c.0 to 64
09:56:02 ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 20 (level, low) -> IRQ 20
09:56:02 PCI: Setting latency timer of device 0000:00:1c.1 to 64
09:56:02 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
09:56:02 PCI: Setting latency timer of device 0000:00:1c.2 to 64
09:56:02 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
09:56:02 PCI: Setting latency timer of device 0000:00:1c.3 to 64
09:56:02 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
09:56:02 PCI: Setting latency timer of device 0000:00:1c.4 to 64
09:56:02 PCI: Setting latency timer of device 0000:00:1e.0 to 64
09:56:02 NET: Registered protocol family 2
09:56:02 IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
09:56:02 TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
09:56:02 TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
09:56:02 TCP: Hash tables configured (established 131072 bind 65536)
09:56:02 TCP reno registered
09:56:02 checking if image is initramfs…it isn’t (no cpio magic); looks like an initrd
09:56:02 Freeing initrd memory: 1607k freed
09:56:02 highmem bounce pool size: 64 pages
09:56:02 io scheduler noop registered
09:56:02 io scheduler anticipatory registered
09:56:02 io scheduler cfq registered (default)
09:56:02 pci 0000:00:02.0: Boot video device
09:56:02 PCI: Setting latency timer of device 0000:00:01.0 to 64
09:56:02 assign_interrupt_mode Found MSI capability
09:56:02 Allocate Port Service[0000:00:01.0:pcie00]
09:56:02 Allocate Port Service[0000:00:01.0:pcie03]
09:56:02 PCI: Setting latency timer of device 0000:00:1c.0 to 64
09:56:02 assign_interrupt_mode Found MSI capability
09:56:02 Allocate Port Service[0000:00:1c.0:pcie00]
09:56:02 Allocate Port Service[0000:00:1c.0:pcie02]
09:56:02 Allocate Port Service[0000:00:1c.0:pcie03]
09:56:02 PCI: Setting latency timer of device 0000:00:1c.1 to 64
09:56:02 assign_interrupt_mode Found MSI capability
09:56:02 Allocate Port Service[0000:00:1c.1:pcie00]
09:56:02 Allocate Port Service[0000:00:1c.1:pcie02]
09:56:02 Allocate Port Service[0000:00:1c.1:pcie03]
09:56:02 PCI: Setting latency timer of device 0000:00:1c.2 to 64
09:56:02 assign_interrupt_mode Found MSI capability
09:56:02 Allocate Port Service[0000:00:1c.2:pcie00]
09:56:02 Allocate Port Service[0000:00:1c.2:pcie02]
09:56:02 Allocate Port Service[0000:00:1c.2:pcie03]
09:56:02 PCI: Setting latency timer of device 0000:00:1c.3 to 64
09:56:02 assign_interrupt_mode Found MSI capability
09:56:02 Allocate Port Service[0000:00:1c.3:pcie00]
09:56:02 Allocate Port Service[0000:00:1c.3:pcie02]
09:56:02 Allocate Port Service[0000:00:1c.3:pcie03]
09:56:02 PCI: Setting latency timer of device 0000:00:1c.4 to 64
09:56:02 assign_interrupt_mode Found MSI capability
09:56:02 Allocate Port Service[0000:00:1c.4:pcie00]
09:56:02 Allocate Port Service[0000:00:1c.4:pcie02]
09:56:02 Allocate Port Service[0000:00:1c.4:pcie03]
09:56:02 HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
09:56:02 N_HDLC line discipline registered.
09:56:02 Linux agpgart interface v0.103
09:56:02 agpgart: Detected an Intel G33 Chipset.
09:56:02 agpgart: Detected 7164K stolen memory.
09:56:02 agpgart: AGP aperture is 256M @ 0xc0000000
09:56:02 [drm] Initialized drm 1.1.0 20060810
09:56:02 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
09:56:02 serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
09:56:02 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
09:56:02 FDC 0 is a National Semiconductor PC87306
09:56:02 brd: module loaded
09:56:02 Uniform Multi-Platform E-IDE driver
09:56:02 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
09:56:02 Probing IDE interface ide0…
09:56:02 Switched to high resolution mode on CPU 1
09:56:02 Switched to high resolution mode on CPU 0
09:56:02 hda: ST3250310NS, ATA DISK drive
09:56:02 Probing IDE interface ide1…
09:56:02 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
09:56:02 hda: max request size: 512KiB
09:56:02 hda: 488397168 sectors (250059 MB), CHS=30401/255/63
09:56:02 hda: cache flushes supported
09:56:02 hda: hda1 hda2 hda3
09:56:02 Driver ‘sd’ needs updating – please use bus_type methods
09:56:02 PNP: No PS/2 controller found. Probing ports directly.
09:56:02 serio: i8042 KBD port at 0x60,0x64 irq 1
09:56:02 serio: i8042 AUX port at 0x60,0x64 irq 12
09:56:02 mice: PS/2 mouse device common for all mice
09:56:02 EDAC MC: Ver: 2.1.0 May 14 2009
09:56:02 usbcore: registered new interface driver usbhid
09:56:02 drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
09:56:02 TCP cubic registered
09:56:02 Initializing XFRM netlink socket
09:56:02 NET: Registered protocol family 1
09:56:02 NET: Registered protocol family 17
09:56:02 NET: Registered protocol family 15
09:56:02 Using IPI Shortcut mode
09:56:02 RAMDISK: Compressed image found at block 0
09:56:02 EXT2-fs warning: checktime reached, running e2fsck is recommended
09:56:02 VFS: Mounted root (ext2 filesystem).
09:56:02 ISO 9660 Extensions: RRIP_1991A
09:56:02 loop: module loaded
09:56:02 EXT2-fs warning: checktime reached, running e2fsck is recommended
09:56:02 VFS: Mounted root (ext2 filesystem) readonly.
09:56:02 Trying to move old root to /initrd … okay
09:56:02 Freeing unused kernel memory: 260k freed
09:56:02 EXT2-fs warning: checktime reached, running e2fsck is recommended
09:56:02 ISO 9660 Extensions: RRIP_1991A
09:56:02 EXT2-fs warning (device hda1): ext2_fill_super: mounting ext3 filesystem as ext2
09:56:02 Intel(R) PRO/1000 Network Driver – version 7.3.20-k2-NAPI
09:56:02 Copyright (c) 1999-2006 Intel Corporation.
09:56:02 ACPI: PCI Interrupt 0000:07:02.0[A] -> GSI 18 (level, low) -> IRQ 18
09:56:02 e1000: 0000:07:02.0: e1000_probe: (PCI:33MHz:32-bit) 00:1b:21:21:3c:b5
09:56:02 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
09:56:02 No dock devices found.
09:56:02 libata version 3.00 loaded.
09:56:02 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
09:56:02 PCI: Setting latency timer of device 0000:03:00.0 to 64
09:56:02 scsi0 : pata_marvell
09:56:02 scsi1 : pata_marvell
09:56:02 ata1: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2000 irq 17
09:56:02 ata2: DUMMY
09:56:02 BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00
09:56:02 ata1.01: NODEV after polling detection
09:56:02 ata1.00: ATAPI: FX54++W, U01L, max UDMA/33
09:56:02 ata1.00: configured for UDMA/33
09:56:02 scsi 0:0:0:0: CD-ROM MITSUMI CD-ROM FX54++W U01L PQ: 0 ANSI: 5
09:56:02 scsi 0:0:0:0: Attached scsi generic sg0 type 5
09:56:02 Driver ‘sr’ needs updating – please use bus_type methods
09:56:02 sr0: scsi3-mmc drive: 54x/54x cd/rw xa/form2 cdda tray
09:56:02 Uniform CD-ROM driver Revision: 3.20
09:56:02 sr 0:0:0:0: Attached scsi CD-ROM sr0
09:56:02 e1000e: Intel(R) PRO/1000 Network Driver – 0.2.0
09:56:02 e1000e: Copyright (c) 1999-2007 Intel Corporation.
09:56:02 ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
09:56:02 PCI: Setting latency timer of device 0000:00:19.0 to 64
09:56:02 eth1: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:39:81:90
09:56:02 eth1: Intel(R) PRO/1000 Network Connection
09:56:02 eth1: MAC: 5, PHY: 6, PBA No: ffffff-0ff
09:56:02 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
09:56:02 PCI: Setting latency timer of device 0000:01:00.0 to 64
09:56:02 eth2: (PCI Express:2.5GB/s:Width x4) 00:0c:bd:01:81:12
09:56:02 eth2: Intel(R) PRO/1000 Network Connection
09:56:02 eth2: MAC: 0, PHY: 4, PBA No: c98149-002
09:56:02 ACPI: PCI Interrupt 0000:01:00.1 -> GSI 17 (level, low) -> IRQ 17
09:56:02 PCI: Setting latency timer of device 0000:01:00.1 to 64
09:56:02 eth3: (PCI Express:2.5GB/s:Width x4) 00:0c:bd:01:81:13
09:56:02 eth3: Intel(R) PRO/1000 Network Connection
09:56:02 eth3: MAC: 0, PHY: 4, PBA No: c98149-002
09:56:02 ata_piix 0000:00:1f.2: version 2.12
09:56:02 ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 21 (level, low) -> IRQ 21
09:56:02 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
09:56:02 PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:1f.2
09:56:02 ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 0 (errno=-16)
09:56:02 PCI: Setting latency timer of device 0000:00:1f.2 to 64
09:56:02 Bad IO access at port 0x0 (return inb(port))
09:56:02

---

[ cut here ]

---

09:56:02 WARNING: at lib/iomap.c:44 bad_io_access+0x3e/0x40()
09:56:02 Modules linked in: ata_piix(+) e1000e sr_mod ata_generic pata_marvell libata dock e1000 loop
09:56:02 Pid: 1076, comm: modprobe Not tainted 2.6.25.20 #1
09:56:02 [] ? printk+0x18/0x21
09:56:02 [] warn_on_slowpath+0x54/0x90
09:56:02 [] ? release_console_sem+0x1cf/0x1f0
09:56:02 [] bad_io_access+0x3e/0x40
09:56:02 [] ioread8+0x2a/0x40
09:56:02 [] ata_check_status+0xb/0x10 [libata]
09:56:02 [] ata_bmdma_freeze+0x2a/0x40 [libata]
09:56:02 [] __ata_port_freeze+0x1b/0x40 [libata]
09:56:02 [] ata_eh_freeze_port+0x2a/0x40 [libata]
09:56:02 [] ata_host_start+0xa6/0x190 [libata]
09:56:02 [] ? pci_bus_write_config_byte+0x53/0x70
09:56:02 [] ata_pci_activate_sff_host+0x2b/0x210 [libata]
09:56:02 [] ? pcibios_set_master+0x6c/0x90
09:56:02 [] ? ata_interrupt+0x0/0x220 [libata]
09:56:02 [] ? pci_set_master+0x54/0x60
09:56:02 [] piix_init_one+0x22f/0x6f6 [ata_piix]
09:56:02 [] ? piix_init_one+0x0/0x6f6 [ata_piix]
09:56:02 [] pci_device_probe+0x5e/0x80
09:56:02 [] driver_probe_device+0x82/0x1a0
09:56:02 [] ? sysfs_create_dir+0x2b/0x50
09:56:02 [] __driver_attach+0xa9/0xb0
09:56:02 [] bus_for_each_dev+0x53/0x80
09:56:02 [] driver_attach+0x19/0x20
09:56:02 [] ? __driver_attach+0x0/0xb0
09:56:02 [] bus_add_driver+0x1af/0x230
09:56:02 [] ? pci_device_remove+0x0/0x40
09:56:02 [] ? pci_device_probe+0x0/0x80
09:56:02 [] driver_register+0x44/0x100
09:56:02 [] __pci_register_driver+0x40/0x80
09:56:02 [] piix_init+0x17/0x27 [ata_piix]
09:56:02 [] sys_init_module+0x11f/0x1d10
09:56:02 [] ? arch_get_unmapped_area_topdown+0x0/0x170
09:56:02 [] ? ata_port_start+0x0/0x40 [libata]
09:56:02 [] ? up_write+0x8/0x10
09:56:02 [] ? sys_mmap2+0xbe/0xc0
09:56:02 [] sysenter_past_esp+0x5f/0x85
09:56:02 =======================
09:56:02 —[ end trace 3c89911bc362602f ]—
09:56:02 ata_piix: probe of 0000:00:1f.2 failed with error -16
09:56:02 ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 21 (level, low) -> IRQ 21
09:56:02 ata_piix 0000:00:1f.5: MAP [ P0 — P1 — ]
09:56:02 PCI: Setting latency timer of device 0000:00:1f.5 to 64
09:56:02 scsi2 : ata_piix
09:56:02 scsi3 : ata_piix
09:56:02 ata3: SATA max UDMA/133 cmd 0x4448 ctl 0x446c bmdma 0x4410 irq 21
09:56:02 ata4: SATA max UDMA/133 cmd 0x4440 ctl 0x4468 bmdma 0x4418 irq 21
09:56:02 ata3: SATA link down (SStatus 0 SControl 300)
09:56:02 ata4: SATA link down (SStatus 0 SControl 300)
09:56:02 iTCO_vendor_support: vendor-support=0
09:56:02 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
09:56:02 iTCO_wdt: Found a ICH9DH TCO device (Version=2, TCOBASE=0x0460)
09:56:02 iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
09:56:02 ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 17 (level, low) -> IRQ 17
09:56:02 PCI: Setting latency timer of device 0000:00:1a.7 to 64
09:56:02 ehci_hcd 0000:00:1a.7: EHCI Host Controller
09:56:02 ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
09:56:02 ehci_hcd 0000:00:1a.7: debug port 1
09:56:02 PCI: cache line size of 32 is not supported by device 0000:00:1a.7
09:56:02 ehci_hcd 0000:00:1a.7: irq 17, io mem 0xd04a1400
09:56:02 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
09:56:02 usb usb1: configuration #1 chosen from 1 choice
09:56:02 hub 1-0:1.0: USB hub found
09:56:02 hub 1-0:1.0: 6 ports detected
09:56:02 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
09:56:02 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
09:56:02 usb usb1: Product: EHCI Host Controller
09:56:02 usb usb1: Manufacturer: Linux 2.6.25.20 ehci_hcd
09:56:02 usb usb1: SerialNumber: 0000:00:1a.7
09:56:02 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
09:56:02 PCI: Setting latency timer of device 0000:00:1d.7 to 64
09:56:02 ehci_hcd 0000:00:1d.7: EHCI Host Controller
09:56:02 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
09:56:02 ehci_hcd 0000:00:1d.7: debug port 1
09:56:02 PCI: cache line size of 32 is not supported by device 0000:00:1d.7
09:56:02 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd04a1000
09:56:02 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
09:56:02 usb usb2: configuration #1 chosen from 1 choice
09:56:02 hub 2-0:1.0: USB hub found
09:56:02 hub 2-0:1.0: 6 ports detected
09:56:02 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
09:56:02 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
09:56:02 usb usb2: Product: EHCI Host Controller
09:56:02 usb usb2: Manufacturer: Linux 2.6.25.20 ehci_hcd
09:56:02 usb usb2: SerialNumber: 0000:00:1d.7
09:56:02 USB Universal Host Controller Interface driver v3.0
09:56:02 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 18 (level, low) -> IRQ 18
09:56:02 PCI: Setting latency timer of device 0000:00:1a.0 to 64
09:56:02 uhci_hcd 0000:00:1a.0: UHCI Host Controller
09:56:02 uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
09:56:02 uhci_hcd 0000:00:1a.0: irq 18, io base 0x000040c0
09:56:02 usb usb3: configuration #1 chosen from 1 choice
09:56:02 hub 3-0:1.0: USB hub found
09:56:02 hub 3-0:1.0: 2 ports detected
09:56:02 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
09:56:02 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
09:56:02 usb usb3: Product: UHCI Host Controller
09:56:02 usb usb3: Manufacturer: Linux 2.6.25.20 uhci_hcd
09:56:02 usb usb3: SerialNumber: 0000:00:1a.0
09:56:02 ACPI: PCI Interrupt 0000:00:1a.1 -> GSI 21 (level, low) -> IRQ 21
09:56:02 PCI: Setting latency timer of device 0000:00:1a.1 to 64
09:56:02 uhci_hcd 0000:00:1a.1: UHCI Host Controller
09:56:02 uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
09:56:02 uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040a0
09:56:02 usb usb4: configuration #1 chosen from 1 choice
09:56:02 hub 4-0:1.0: USB hub found
09:56:02 hub 4-0:1.0: 2 ports detected
09:56:02 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
09:56:02 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
09:56:02 usb usb4: Product: UHCI Host Controller
09:56:02 usb usb4: Manufacturer: Linux 2.6.25.20 uhci_hcd
09:56:02 usb usb4: SerialNumber: 0000:00:1a.1
09:56:02 ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 17 (level, low) -> IRQ 17
09:56:02 PCI: Setting latency timer of device 0000:00:1a.2 to 64
09:56:02 uhci_hcd 0000:00:1a.2: UHCI Host Controller
09:56:02 uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
09:56:02 uhci_hcd 0000:00:1a.2: irq 17, io base 0x00004080
09:56:02 usb usb5: configuration #1 chosen from 1 choice
09:56:02 hub 5-0:1.0: USB hub found
09:56:02 hub 5-0:1.0: 2 ports detected
09:56:02 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
09:56:02 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
09:56:02 usb usb5: Product: UHCI Host Controller
09:56:02 usb usb5: Manufacturer: Linux 2.6.25.20 uhci_hcd
09:56:02 usb usb5: SerialNumber: 0000:00:1a.2
09:56:02 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
09:56:02 PCI: Setting latency timer of device 0000:00:1d.0 to 64
09:56:02 uhci_hcd 0000:00:1d.0: UHCI Host Controller
09:56:02 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
09:56:02 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004060
09:56:02 usb usb6: configuration #1 chosen from 1 choice
09:56:02 hub 6-0:1.0: USB hub found
09:56:02 hub 6-0:1.0: 2 ports detected
09:56:02 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
09:56:02 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
09:56:02 usb usb6: Product: UHCI Host Controller
09:56:02 usb usb6: Manufacturer: Linux 2.6.25.20 uhci_hcd
09:56:02 usb usb6: SerialNumber: 0000:00:1d.0
09:56:02 ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 19
09:56:02 PCI: Setting latency timer of device 0000:00:1d.1 to 64
09:56:02 uhci_hcd 0000:00:1d.1: UHCI Host Controller
09:56:02 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
09:56:02 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004040
09:56:02 usb usb7: configuration #1 chosen from 1 choice
09:56:02 hub 7-0:1.0: USB hub found
09:56:02 hub 7-0:1.0: 2 ports detected
09:56:02 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
09:56:02 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
09:56:02 usb usb7: Product: UHCI Host Controller
09:56:02 usb usb7: Manufacturer: Linux 2.6.25.20 uhci_hcd
09:56:02 usb usb7: SerialNumber: 0000:00:1d.1
09:56:02 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
09:56:02 PCI: Setting latency timer of device 0000:00:1d.2 to 64
09:56:02 uhci_hcd 0000:00:1d.2: UHCI Host Controller
09:56:02 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
09:56:02 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004020
09:56:02 usb usb8: configuration #1 chosen from 1 choice
09:56:02 hub 8-0:1.0: USB hub found
09:56:02 hub 8-0:1.0: 2 ports detected
09:56:02 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
09:56:02 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
09:56:02 usb usb8: Product: UHCI Host Controller
09:56:02 usb usb8: Manufacturer: Linux 2.6.25.20 uhci_hcd
09:56:02 usb usb8: SerialNumber: 0000:00:1d.2
09:56:02 FAT: bogus number of reserved sectors
09:56:02 VFS: Can’t find a valid FAT filesystem on dev hda3.
09:56:02 EXT3-fs: INFO: recovery required on readonly filesystem.
09:56:02 EXT3-fs: write access will be enabled during recovery.
09:56:02 kjournald starting. Commit interval 5 seconds
09:56:02 EXT3-fs: recovery complete.
09:56:02 EXT3-fs: mounted filesystem with ordered data mode.
09:56:02 FAT: bogus number of reserved sectors
09:56:02 VFS: Can’t find a valid FAT filesystem on dev hda3.
09:56:02 kjournald starting. Commit interval 5 seconds
09:56:02 EXT3-fs warning: checktime reached, running e2fsck is recommended
09:56:02 EXT3 FS on hda3, internal journal
09:56:02 EXT3-fs: mounted filesystem with ordered data mode.
09:56:02 Adding 131064k swap on /DB/swap-file. Priority:-1 extents:34 across:133244k
09:56:02 warning: `named’ uses 32-bit capabilities (legacy support in use)
09:56:02 nf_conntrack version 0.5.0 (65536 buckets, 524288 max)
09:56:04 ip_tables: (C) 2000-2006 Netfilter Core Team
09:56:12 Bridge firewalling registered
09:56:12 DEFAULTBR: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
09:56:12 tun: Universal TUN/TAP device driver, 1.6
09:56:12 tun: (C) 1999-2004 Max Krasnyansky
09:56:12 wlan: 0.9.4
09:56:12 ath_hal: module license ‘Proprietary’ taints kernel.
09:56:12 ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
09:56:12 ath_rate_sample: 1.2 (0.9.4)
09:56:12 ath_pci: 0.9.4
09:56:12 ath_pci: driver unloaded
09:56:12 ath_rate_sample: unloaded
09:56:12 ath_hal: driver unloaded
09:56:12 wlan: driver unloaded
09:56:12 BRIDGE00: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
09:56:13 device ETH02 entered promiscuous mode
09:56:13 device ETH03 entered promiscuous mode
09:56:13 e1000: ETH00: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
09:56:18
09:56:18 [105e][39] find 0
09:56:18 [105e][39] find 0
09:56:18 find 1 dual
09:56:18 find 1 n2265 dev
09:56:18 e1000_num = 2
09:56:18 ETH02: TSO is Enabled
09:56:18 ETH03: TSO is Enabled
09:56:21 ETH03: Link is Up 1000 Mbps Full Duplex, Flow Control: None
09:56:21 BRIDGE00: port 2(ETH03) entering learning state
09:56:22 ETH02: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
09:56:22 BRIDGE00: port 1(ETH02) entering learning state
09:56:26 BRIDGE00: topology change detected, propagating
09:56:26 BRIDGE00: port 2(ETH03) entering forwarding state
09:56:27 BRIDGE00: topology change detected, propagating
09:56:27 BRIDGE00: port 1(ETH02) entering forwarding state

[AtroposXMember]

The load is usually around 1%, ram around 138megs, connections between 32k and 65k (32,000 – 65,000), and bandwidth usually around 100megs down by 25megs up.

[AtroposXMember]

I had this in the post boot script:
# Startup Script
echo “3600” > /proc/sys/net/ipv4/netfilter/ip_conntrack_tcp_timeout_established
echo “1048576” > /proc/sys/net/ipv4/netfilter/ip_conntrack_max
echo 134217728 > /proc/sys/kernel/shmall
echo 134217728 > /proc/sys/kernel/shmmax
cd /Database/niagara2265_r10/;./n2265_load;./n2265_util -a;./n2265_util -0
ethtool -K ETH02 tso on;ethtool -K ETH03 tso on

had to make the 3600 for the tcp timeout, otherwise connections would build up, and tank the box. Raised the maximum conntrack max, adjusted the paging as someone else on here stated worked well for them, loads the driver, adds a heartbeat, and changes it to active/bypass mode, then turns on TSO for both of ther interfaces.

[ppaliasMember]

Could be a hardware error. It would be helpful to check the screen for possible kernel panic. Another thing that comes into my mind is to remove the swap, you have 3GB ram, it is more than necessary.

[AtroposXMember]

Update:

The box crashed again since the last post. A monitor and keyboard was connected at the time of crash. No video display working on monitor. Keyboard caps-lock key and num-lock don’t light up on a PS2, and same for a USB keyboard. The bridge NIC’s activity lights are off, not on or flashing at all, and the 3com management NIC activity light is lit up.

The kernel log stated this:
11:10:05 ETH03: Link is Down
11:10:05 ETH02: Link is Down
11:21:22 input: AT Translated Set 2 keyboard as /class/input/input0
11:27:24 hub 1-0:1.0: unable to enumerate USB device on port 3
11:38:41 hub 1-0:1.0: unable to enumerate USB device on port 3

When the bridge nic went down, a monitor and keyboard was connected, looks like it tried to see the PS2 and USB keyboards. No other kernel entries since then, must be a hardware issue somewhere then…

[AtroposXMember]

And this in the kernel log two days in a row, four days ‘prior’ to the crash:

11:25:03 hda: status timeout: status=0xd0 { Busy }
11:25:03 ide: failed opcode was: unknown
11:25:03 hda: no DRQ after issuing MULTWRITE_EXT
11:25:03 ide0: reset: success

09:35:08 hda: status timeout: status=0xd0 { Busy }
09:35:08 ide: failed opcode was: unknown
09:35:08 hda: no DRQ after issuing MULTWRITE_EXT
09:35:08 ide0: reset: success

probably hard drive failure?

[ppaliasMember]

You can you the smart monitor tools to check the disk integrity.

smartctl -h

[Author]

Posts