ZS, VDSL and MTU

Home Page Forums Network Management Networking ZS, VDSL and MTU

This topic contains 0 replies, has 0 voices, and was last updated by  Gandalf 5 years, 4 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #43702

    Gandalf
    Member

    Hello,
    first I’D like to thank everybody for his/her hard work on Zeroshell. I have an issue with german VDSL. I am using actual ZS as Router/FW for my home Office. VLAN tagging and logging into VDSL works great. But: when I am testing (http://www.speedguide.net) the MTU I will never ever come over 1452. Loggin into Shell of ZS and doing ip link Show, ppp0 will have an MTU 1492. But measuring from the outside it’ll see 1452. Because this has an Impact on my DL Speed (50MB), I’d like to Chance it, so I can use the full BW. Searching the Forum and the web did not get any result on this.
    Who is able to tell how I can Change this?
    Thank you for your help which is appreciated.
    G.t.G.

    #52809

    Gandalf
    Member

    I am a liitle bit disappointed 🙁 that nobody would or could answer to my question!!
    Is there really no one around who has the same issue and solved it??

    Gandalf…..

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.