ZS 3.3.2 update brakes static routes to VPNs

Home Page Forums Network Management Signal a BUG ZS 3.3.2 update brakes static routes to VPNs

This topic contains 0 replies, has 0 voices, and was last updated by  zgypa 4 years, 2 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #44194

    zgypa
    Member

    Description

    I applied the 3.3.2 update from 3.3.1 and after the system came back up, the static routes towards the VPNs i have were pointing to the loopback interface, instead of the VPN interface as such:


    Destination Gateway Genmask Flags MSS Window irtt Iface
    10.1.0.0 10.2.1.6 255.255.240.0 UG 0 0 0 lo

    instead of


    Destination Gateway Genmask Flags MSS Window irtt Iface
    10.1.0.0 10.2.1.6 255.255.240.0 UG 0 0 0 VPN01

    Workaround

    Select the route from the Router panel, edit then save.

    #53702

    zgypa
    Member

    Cross-posted in italian forum

    The problem persists, also after installation of package ID 23320 BUG FIX #00 – Net Balancer and VPN Failover : After applying the above mentioned bug fix, the problem seems to appear after each and every reboot, whereas before it only happened once, after the update.

    This is of priority severe/critical, as on those network, where services rely on a VPN (like LDAP, DNS, RADIUS, printers, etc) entire network functionality will be down until admin intervention.

    I am holding off the application of this patch on other production implementations of ZS.[/url]

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.