ZS 3.3.2 Netbalancer Problem

Home Page › Forums › Network Management › ZeroShell › ZS 3.3.2 Netbalancer Problem

This topic contains 1 reply, has 0 voices, and was last updated by  deltree 3 years, 9 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • June 28, 2015 at 4:13 pm #44320

    deltree
    Member

    Hi,
    I have a problem with failover monitor
    18:04:31 Pings to 8.8.8.8 failed (1/15 required, 0/15 achieved) on gateway (openip 1)
    18:05:43 Pings to 208.67.222.222 failed (1/15 required, 0/15 achieved) on gateway (openip 1)
    18:06:51 Pings to X.X.X.X failed (1/15 required, 0/15 achieved) on gateway (openip 1)
    18:06:51 FAULT: openip 1 (Interface: ppp0) [Last Uptime: 0s]

    Number of probes before marking DOWN set to 15
    Number of probes before marking UP set to 2
    Reply timeout (seconds) set to 5
    Pause before starting a new cycle (seconds) set to 10

    With older version it was working… It seems that the settings are not taken in consideration !
    Thanks for your help

  • Author
    Posts
Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.