Zeroshell & VM Server multiple networks

Home Page Forums Network Management ZeroShell Zeroshell & VM Server multiple networks

This topic contains 1 reply, has 0 voices, and was last updated by  thegalaxyboy 9 years, 8 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #41881

    thegalaxyboy
    Member

    Hi All,

    I have a VM server with several vmnets (2-6) as Host only (eg. 10.10.10.0/24 and 192.168.2.0/24). I have installed 5 VM machines – zeroshell connected to vmnet1 and 4 windows pc’s connected vmnets 2-6.

    I would like routing to take place between the 4 pc’s.

    I have connected to the webadmin of zeroshell but am unclear as to how I can setup the routing side of things between the 4 pc’s (a- 10.10.10.2, b 10.10.20.2, c-192.168.2.2 and d-192.168.10.2 all in a 255.255.255.0 subnet). Zeroshell’s ip is 192.168.1.2. Not pings from the host server which has vm installed work all fine to the vm machines.

    Any help would be appreciated.

    Thank you.

    #48680

    thegalaxyboy
    Member

    Sorry – overlooked this. What gateway do I need for the zeroshell?

    #48681

    ppalias
    Member

    You need to have one router that will interconnect all these vmnets. You will assign one IP from each vmnet to every interface of the router and then you assign this IP as the gateway at the PCs in the vmnets.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.