ZeroShell RAMDISK Home Page › Forums › Network Management › ZeroShell › ZeroShell RAMDISK This topic contains 1 reply, has 0 voices, and was last updated by Minxster 7 years ago. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts April 23, 2012 at 10:32 am #43342 MinxsterParticipant I’m using Beta16 on an ESX 3.5 installation, but I seem to need one of the following: 1) Can’t get ZeroShell installed to use a SCSI (VMWare) hard disk (so I would no longer need the bootable ISO). This would solve my /dev/ram2 size issue or… 2) Increase the size of /dev/ram2 – is there something I can put into pre-boot to increase the size from 32mb? Any help would be appreciated. Dav April 24, 2012 at 10:41 am #52324 mosheiMember thanks for this way that we can install zeroshell on HDD and change its FS … HVAC New York May 4, 2012 at 10:50 am #52325 mgibbonsMember you need to install to a vmware IDE hard disk Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.