Zeroshell PAE Kernal

Home Page › Forums › Network Management › ZeroShell › Zeroshell PAE Kernal

This topic contains 1 reply, has 0 voices, and was last updated by  whitesun 3 years, 11 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • May 19, 2015 at 9:58 am #44292

    whitesun
    Member

    Here is the hardware I got:
    Dell PowerEdge 2650 2x Xeon 2.8Ghz with 12GB of Ram
    This only supports 32-Bit Memory Addressing.

    Here is what I am trying to do:
    Zeroshell 3.3.2 no longer support a PAE Kernal out of the box.

    But Zeroshell 3.0.0 supports a PAE Kernal – Kernel 3.14.21-ZS-PAE, So if I reinstall Zeroshell 3.0.0 and then install the PAE Kernal included with the release. After that do an upgrade to Zeroshell 3.3.2. Here is 2 questions I have:

    1. Will the PAE Kernal be retained in the upgrade?
    2. Is the LUN Code the same for 3.0.0, if so, as long as I do not change hardware am I still avaiable to activate.

    I do not know if anyone has tried this before, If so could you let me know if you were successful or not.

    Thanks you so much 🙂

  • Author
    Posts
Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.