I boot my PI with USB stick of Zeroshell and install to the SDcard. Everything works as it should but then if device is powered off as intended using just the powercable and unplugging it will not longer boot correctly again. It has to be powered off using a shutdown command for it to be stable. However this does not work on a raspberry pi. I also just unplug them not only that you can’t use this as a router if there is a poweroutage and your batter backup fails you have a corrupt system all the time.
I have 2 other pi’s with raspberry on them and they work just fine being unplugged and booted. Can you look into what is causing this as I really want to use zeroshell on my pi.