Zeroshell on Ip-I 233

Home Page › Forums › Network Management › ZeroShell › Zeroshell on Ip-I 233

This topic contains 4 replies, has 0 voices, and was last updated by  sma 11 years, 10 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 27, 2007 at 11:41 am #40720

    sma
    Member

    I am trying to boot this system on Asus TX97-e with iP-I 233 Mhz and 128 Mb ram.
    System halts after message freeing 216 kb kernel memory! 🙁 🙁 🙁
    Can you advice anythyng? 🙂

    July 30, 2007 at 12:34 am #45713

    webwarrior
    Member

    Hi,

    Is it possible to have 512MB ram in it.

    Just try and borrow some, test it, and let me know if there is any difference.

    July 30, 2007 at 4:41 pm #45714

    sma
    Member

    I don’t have 512 Dimm? but with 256Mb ram result is the same!
    I try to boot from that CD in my laptop (PIII-900 256Mb) fnd it’s run well!

    July 30, 2007 at 6:51 pm #45715

    saadakhtar
    Member

    try and boot from cd with ACPI disabled and post your results.

    July 30, 2007 at 7:38 pm #45716

    sma
    Member

    already had try all standart boot variants!
    the seme result…
    may be some other boot options???

    July 30, 2007 at 8:06 pm #45717

    webwarrior
    Member

    Try another machine, and dump that one.

    It is not worth the trouble!

    I have had no trouble with any pc to date.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.