Zeroshell not recognizing USB Ethernet (RNDIS)

Home Page Forums Network Management ZeroShell Zeroshell not recognizing USB Ethernet (RNDIS)

This topic contains 0 replies, has 0 voices, and was last updated by  rgermond 9 years, 1 month ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #42423

    rgermond
    Member

    Hello all,

    I just discovered Zeroshell, and it looks like it might be able to help me out quite a bit with some lab testing.

    However, I have a radio that can interface with a PC via RNDIS, and appears as a USB ethernet adapter. Zeroshell doesn’t seem to recognize the radio or any USB ethernet adapters I have.

    Is there any way to get Zeroshell to recognize the USB ethernet devices?

    Thanks in advance.

    #50369

    ppalias
    Member

    If it is supported on kernel 2.6.25.20 then most likely it is supported in ZS 1.0beta12 as well.
    Have you verified with dmesg, lsmod, “ifconfig -a” and lsusb if there are no modules and they are not loaded?

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.