Zeroshell @ Nortel Contivity 1010

Home Page Forums Network Management Embedded Devices Zeroshell @ Nortel Contivity 1010

  • This topic is empty.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #40745
    micol
    Member

    Has anyone has any sucess with zeroshell on a Nortel Contivity 1010 embedded platform? I did some google search and found there are some issues with the e100 driver on 2.6 Kernel.(http://groups.google.com/group/linux.kernel/msg/391aebbb3dfd6039).

    See my Contivity 1010 with Zeroshell log/traces bellow, I am facing EEPROM corrupted errors. THX!

    Micol

    General Software Celeron Embedded BIOS ™ Version 4.3
    Nortel BIOS version 4.3ral Software, Inc.

    Nortel Networks Contivity

    00000640K Low Memory Passed
    00129024K Ext Memory Passed
    Wait…..

    (C) 2000 General Software, Inc.
    Celeron-4.3-6E69-E20E


    Z e r o S h e l l – Net Services 1.0.beta6 August 23, 2007 – 21:41


    Hostname : zeroshell.example.com
    CPU (1) : Celeron (Mendocino) 300MHz
    Kernel : 2.6.19.7
    Memory : 125264 kB https://192.168.0.75
    Uptime : 0 days, 0:1 User : admin
    Load : 1.03 0.28 0.09 Password : zeroshell
    Database : CompactFlash DB


    COMMAND MENU
    Activate database

    Change admin password
    Deactivate database Show Routing Table
    Shell Prompt Show Firewall Rules
    Reboot Show Network Interface
    Shutdown Fail-Safe Mode
    Create a Bridge

    Select: S

    root@zeroshell root> dmesg
    Linux version 2.6.19.7 (root@pcp-scr) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #3 SMP Fri Jun 15 22:36:51 CEST 20
    07
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 – 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 – 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 – 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 – 0000000007f00000 (usable)
    BIOS-e820: 00000000fff00000 – 0000000100000000 (reserved)
    user-defined physical RAM map:
    user: 0000000000000000 – 000000000009f800 (usable)
    user: 000000000009f800 – 00000000000a0000 (reserved)
    user: 00000000000e0000 – 0000000000100000 (reserved)
    user: 0000000000100000 – 0000000007f00000 (usable)
    0MB HIGHMEM available.
    127MB LOWMEM available.
    Entering add_active_range(0, 0, 32512) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 32512
    HighMem 32512 -> 32512
    early_node_map[1] active PFN ranges
    0: 0 -> 32512
    On node 0 totalpages: 32512
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 222 pages used for memmap
    Normal zone: 28194 pages, LIFO batch:7
    HighMem zone: 0 pages used for memmap
    DMI not present or invalid.
    ACPI: Unable to locate RSDP
    Allocating PCI resources starting at 10000000 (gap: 07f00000:f8100000)
    Detected 300.694 MHz processor.
    Built 1 zonelists. Total pages: 32258
    Kernel command line: ramdisk_size=131072 quiet mem=130048K
    Local APIC disabled by BIOS — you can enable it with “lapic”
    mapped APIC to ffffd000 (01109000)
    Enabling fast FPU save and restore… done.
    Initializing CPU#0
    PID hash table entries: 512 (order: 9, 2048 bytes)
    Console: colour dummy device 80×25
    Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
    Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
    Memory: 123600k/130048k available (2234k kernel code, 5916k reserved, 737k data, 216k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff4e000 – 0xfffff000 ( 708 kB)
    pkmap : 0xff800000 – 0xffc00000 (4096 kB)
    vmalloc : 0xc8800000 – 0xff7fe000 ( 879 MB)
    lowmem : 0xc0000000 – 0xc7f00000 ( 127 MB)
    .init : 0xc03ee000 – 0xc0424000 ( 216 kB)
    .data : 0xc032ea14 – 0xc03e7014 ( 737 kB)
    .text : 0xc0100000 – 0xc032ea14 (2234 kB)
    Checking if this processor honours the WP bit even in supervisor mode… Ok.
    Calibrating delay using timer specific routine.. 602.41 BogoMIPS (lpj=1204821)
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 128K
    CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000
    Compat vDSO mapped to ffffe000.
    Checking ‘hlt’ instruction… OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 16k freed
    CPU0: Intel Celeron (Mendocino) stepping 05
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    Brought up 1 CPUs
    checking if image is initramfs…it isn’t (no cpio magic); looks like an initrd
    Freeing initrd memory: 1287k freed
    NET: Registered protocol family 16
    PCI: PCI BIOS revision 2.10 entry at 0xe72d8, last bus=1
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: Interpreter disabled.
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI: disabled
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PCI: Probing PCI hardware
    PCI: Probing PCI hardware (bus 00)
    PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
    PCI quirk: region 0500-053f claimed by ICH4 GPIO
    PCI: Firmware left 0000:01:00.0 e100 interrupts enabled, disabling
    PCI: Firmware left 0000:01:01.0 e100 interrupts enabled, disabling
    PCI: Transparent bridge – 0000:00:1e.0
    PCI: Using IRQ router PIIX/ICH [8086/2410] at 0000:00:1f.0
    PCI: Bridge: 0000:00:1e.0
    IO window: e000-efff
    MEM window: c0100000-c02fffff
    PREFETCH window: 84000000-842fffff
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
    TCP established hash table entries: 4096 (order: 3, 32768 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 4096 bind 2048)
    TCP reno registered
    io scheduler noop registered
    io scheduler anticipatory registered (default)
    HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
    N_HDLC line discipline registered.
    Linux agpgart interface v0.101 (c) Dave Jones
    agpgart: Detected an Intel i810 Chipset.
    agpgart: detected 4MB dedicated video ram.
    agpgart: AGP aperture is 64M @ 0x80000000
    [drm] Initialized drm 1.0.1 20051102
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    FDC 0 is a post-1991 82077
    RAMDISK driver initialized: 16 RAM disks of 131072K size 1024 blocksize
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ICH: IDE controller at PCI slot 0000:00:1f.1
    ICH: chipset revision 2
    ICH: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
    Probing IDE interface ide0…
    hda: KODAK ATA_FLASH, CFA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1…
    Probing IDE interface ide1…
    hda: max request size: 128KiB
    hda: 1001952 sectors (512 MB) w/1KiB Cache, CHS=994/16/63
    hda: hda1 hda2 hda3
    usbcore: registered new interface driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    PNP: No PS/2 controller found. Probing ports directly.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    mice: PS/2 mouse device common for all mice
    EDAC MC: Ver: 2.0.1 Jun 15 2007
    Netfilter messages via NETLINK v0.30.
    ip_conntrack version 2.4 (1016 buckets, 8128 max) – 240 bytes per conntrack
    TCP cubic registered
    Initializing XFRM netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    NET: Registered protocol family 15
    Using IPI Shortcut mode
    Time: tsc clocksource has been installed.
    RAMDISK: Compressed image found at block 0
    EXT2-fs warning: checktime reached, running e2fsck is recommended
    VFS: Mounted root (ext2 filesystem).
    ISO 9660 Extensions: RRIP_1991A
    loop: loaded (max 8 devices)
    VFS: Mounted root (ext2 filesystem) readonly.
    Trying to move old root to /initrd … okay
    Freeing unused kernel memory: 216k freed
    ISO 9660 Extensions: RRIP_1991A

    e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    PCI: setting IRQ 12 as level-triggered
    PCI: Found IRQ 12 for device 0000:01:00.0
    IRQ routing conflict for 0000:01:00.0, have irq 9, want irq 12
    e100: eth0: e100_probe: addr 0xc0100000, irq 9, MAC addr 00:09:97:16:B2:90
    PCI: Assigned IRQ 12 for device 0000:01:01.0

    e100: 0000:01:01.0: e100_eeprom_load: EEPROM corrupted
    e100: probe of 0000:01:01.0 failed with error -11

    USB Universal Host Controller Interface driver v3.0
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    uhci_hcd 0000:00:1f.2: UHCI Host Controller
    uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1f.2: irq 12, io base 0x0000f800
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    hub 1-0:1.0: over-current change on port 1
    hub 1-0:1.0: over-current change on port 2
    libata version 2.00 loaded.
    FAT: bogus number of reserved sectors
    VFS: Can’t find a valid FAT filesystem on dev hda3.
    EXT3-fs: INFO: recovery required on readonly filesystem.
    EXT3-fs: write access will be enabled during recovery.
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: recovery complete.
    EXT3-fs: mounted filesystem with ordered data mode.
    FAT: bogus number of reserved sectors
    VFS: Can’t find a valid FAT filesystem on dev hda3.
    kjournald starting. Commit interval 5 seconds
    EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
    EXT3 FS on hda3, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    process `named’ is using obsolete setsockopt SO_BSDCOMPAT
    ip_conntrack_pptp version 3.1 loaded
    ip_nat_pptp version 3.0 loaded
    ip_tables: (C) 2000-2006 Netfilter Core Team
    Bridge firewalling registered
    irq 12: nobody cared (try booting with the “irqpoll” option)
    [] __report_bad_irq+0x24/0x80
    [] note_interrupt+0x218/0x250
    [] handle_IRQ_event+0x25/0x50
    [] handle_level_irq+0xeb/0x120
    [] do_IRQ+0x69/0xc0
    [] common_interrupt+0x1a/0x20
    [] __do_softirq+0x62/0xf0
    [] do_softirq+0x3b/0x50
    [] do_IRQ+0x6e/0xc0
    [] common_interrupt+0x1a/0x20
    [] __tcf_em_tree_match+0xb/0x140
    [] rtnl_fill_ifinfo+0x272/0x4c0
    [] rtmsg_ifinfo+0x64/0xd0
    [] rtnetlink_event+0x32/0x60
    [] notifier_call_chain+0x25/0x30
    [] dev_open+0x6a/0x70
    [] dev_change_flags+0xfc/0x130
    [] devinet_ioctl+0x502/0x6f0
    [] dev_ifsioc+0xeb/0x360
    [] sock_ioctl+0x0/0x220
    [] sock_ioctl+0x114/0x220
    [] tasklet_action+0x59/0xc0
    [] sock_ioctl+0x0/0x220
    [] do_ioctl+0x2b/0x90
    [] vfs_ioctl+0x5c/0x2b0
    [] sys_ioctl+0x3d/0x70
    [] syscall_call+0x7/0xb
    =======================
    handlers:
    [] (usb_hcd_irq+0x0/0x60)
    Disabling IRQ #12
    root@zeroshell root>

    root@zeroshell root> ifconfig -a
    DEFAULTBR Link encap:Ethernet HWaddr 00:00:00:00:00:00
    BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

    ETH00 Link encap:Ethernet HWaddr 00:09:97:16:B2:90
    UP BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

    ETH00:00 Link encap:Ethernet HWaddr 00:09:97:16:B2:90
    inet addr:192.168.0.75 Bcast:192.168.0.255 Mask:255.255.255.0
    UP BROADCAST MULTICAST MTU:1500 Metric:1

    dummy0 Link encap:Ethernet HWaddr EE:95:C9:D4:39:F8
    inet addr:192.168.141.142 Bcast:192.168.141.255 Mask:255.255.255.0
    BROADCAST NOARP MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

    dummy1 Link encap:Ethernet HWaddr 2E:C3:24:59:FF:04
    inet addr:192.168.142.142 Bcast:192.168.142.255 Mask:255.255.255.255
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:106 errors:0 dropped:0 overruns:0 frame:0
    TX packets:106 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:9788 (9.5 Kb) TX bytes:9788 (9.5 Kb)

    root@zeroshell root>

    #45792
    imported_fulvio
    Participant

    I will compile the eeproo.ko module as soon as possible and put it in the download section.

    Regards
    Fulvio

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.