ZeroShell lost configuration when blackout occurs.

Home Page › Forums › Network Management › ZeroShell › ZeroShell lost configuration when blackout occurs.

This topic contains 1 reply, has 0 voices, and was last updated by  marcolino 10 years, 4 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • October 15, 2008 at 8:25 am #41231

    marcolino
    Member

    Hi!!
    First of all, congratulations for your great work: is exellent!!!

    We’ve installed ZeroShell 1.0.beta10 (CompactFlash-1GB img) on a Soekris Engineering net4801.
    Everything works fine.

    But we’ve verified that when occurs an external blackout power, and then, a power restart, the firewall lost che configuration setting and it starts with a “default” configuration.
    This configuration is a sort of “safe mode” and disable any function we’ve made.
    The profile created still memorized on the CF and the only way to reload it is a backup restore.

    I’ve read a topic that is more or less the same as mine: the only difference is for the support disk (CF in my case and USB in the other).
    http://www.zeroshell.net/eng/forum/viewtopic.php?t=200&highlight=lost+config

    Anybody has a similar problem and/or can help me?

    Thank you very much for the answers in advance.

    Best regards.
    Marco.

  • Author
    Posts
Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.