Zeroshell installing on APU platform Home Page › Forums › Network Management › ZeroShell › Zeroshell installing on APU platform This topic contains 0 replies, has 0 voices, and was last updated by marco.cavallari 4 years, 3 months ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts March 15, 2015 at 10:51 am #44244 marco.cavallariMember Please how is the bet way to boot ZeroShell on au APU platform device? External USB, SD Card (what does it means ‘connected through USB’?) and the SD card support is on the board?. the image file is ZeroShell-3.3.2-USB.img? does it works on APU platform? Thanks a lot March 15, 2015 at 11:51 am #53763 redfiveParticipant You can install it directly on mSata, assemble your apu device, then connect an usb stick with Zs to one port, boot from usb, and then, via the installation manager, you can install ZS on mSata. Regards Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.