zeroshell in RouterStation Pro

Home Page › Forums › Network Management › Embedded Devices › zeroshell in RouterStation Pro

This topic contains 0 replies, has 0 voices, and was last updated by  darekb 8 years, 9 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • June 26, 2010 at 9:12 am #42467

    darekb
    Member

    Hello,

    is it possible to port zeroshell to RouterStation Pro
    Overall system configuration

    * CPU Atheros AR7161 MIPS 24K running @ 680MHz
    * MEMORY DDR 128MB
    * FLASH SPI 16MB
    * 4-Port Gigabit Ethernet Switch
    * Three MINI-PCI Slots supports Type IIIA
    * USB 2.0 Host
    * Built in RS232/dB9 Connector
    * SDIO
    * On board Real Time Clock “RTC”
    * DC Power Jack
    * 802.3af 48V compatible

    I would be happy

    Thanks

    June 26, 2010 at 3:54 pm #50560

    ppalias
    Member

    I’ll second that. I already have 2 of these with OpenWRT installed on them, but due to their capabilities it would be handy to be able to install Zeroshell as well. Though there should be a way to utilize all of the minipci slots if wifi adapters are installed.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.