Zeroshell as VPN Client Home Page › Forums › Network Management › VPN › Zeroshell as VPN Client This topic contains 2 replies, has 0 voices, and was last updated by Alexander 8 years, 6 months ago. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts October 9, 2010 at 7:14 pm #42679 AlexanderMember Hello All, I am trying to connect my Zeroshell to a VPN (provided by http://usaproxyserver.com/) They gave me an ip adress and username password. I got it working to the point where I have the right preshare key that is available from the website and the port they are using. But how do I set the username and password under Zero shell? Regards, Alex October 13, 2010 at 10:56 am #51173 ppaliasMember We need to see the configuration file that those guys are providing you. Usually it is located in “C:Program FilesOpenvpnconfig” October 21, 2010 at 11:56 am #51174 AlexanderMember They provide it here: http://helpdesk.scothosts.com/index.php?_m=downloads&_a=view&parentcategoryid=6&pcid=4&nav=0,1,4 so far, I have been using the sharing function of Microsoft for the VPN part but it limits you on a set of IP so not an elegant solution. Alex October 22, 2010 at 6:38 am #51175 ppaliasMember Check this from the manual –auth-user-pass [up] : Authenticate with server using username/password. up is a file containing username/password on 2 lines, or omit to prompt from console. So add this option in the parameters field and you should be ok 🙂 Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic.