ZeroShell as VPN Client to replace openVPN GUI on XP (Help)

Home Page Forums Network Management Networking ZeroShell as VPN Client to replace openVPN GUI on XP (Help)

  • This topic is empty.
Viewing 2 posts - 16 through 17 (of 17 total)
  • Author
    Posts
  • #48541
    Andy22
    Member

    Oki, i got it working finally! 😀

    Some admin over at OpenVPN.eu solved it by adding:


    sysctl -w net.ipv4.ip_forward=1
    iptables -t nat -I POSTROUTING -s 192.168.0.0/24 -j MASQUERADE

    But im still happy someone (ppalias) took the time to help me.

    cheer!

    PS: The only problem is is there a way else than postboot script to make thos changes permanent? I cant figure out how to make this special NAT table entry via ZS?
    Im also failing to get autologin working for ZS openVPN version, someone has a binary that accept password via file?

    #48542
    ppalias
    Member

    ip.forwarding=1 should be already configured on the ZS, otherwise it won’t work as a router.
    The iptables rule is masquerading (NATing) everything that comes from 192.168.0.0/24. ZS arranges NAT with interfaces, not networks. Maybe your problem was just to add the tunnel interface on the NAT list.

Viewing 2 posts - 16 through 17 (of 17 total)
  • You must be logged in to reply to this topic.