Zeroshell and WDS

Home Page Forums Network Management ZeroShell Zeroshell and WDS

This topic contains 0 replies, has 0 voices, and was last updated by  skumaran 9 years, 8 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #41731

    skumaran
    Member

    Hello,

    I am not sure if some one saw my reply to an old post. So I am starting a new topic. It would be great if some one can help me out with my problem.

    I have currently configured my Soekris board running Zeroshell in WDS mode and I feel it is working properly.

    I have a question about using Zeroshell for configuring WDS.

    Is it possible to use Zeroshell for configuring multihop WDS? For example I have one Root Access point(AP) and another in STA client mode. Both are connected through a WDS link. Is it possible for another motherboard running Zeroshell with WDS connect to the board with STA client mode and still talk to the root access point?

    I am talking about something similar to the one below. All connected wirelessly

    Root Access point —> STA client 1 –> STA client 2 –> Laptop

    If some one has already done something similar to this please help me out

    Thanks

    #48276

    skumaran
    Member

    Hello,

    Can anyone please help me with configuring WDS using Zeroshell in my motherboard.

    Thanks

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.