wrt54gl with freifunk 1.4.5 problem

Home Page Forums Network Management Linux and Networking wrt54gl with freifunk 1.4.5 problem

This topic contains 1 reply, has 0 voices, and was last updated by  digitalspy99 10 years, 5 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #41133

    digitalspy99
    Member

    hey,,
    I installed freifunk 1.4.5 on my wrt 54gl routers from linksys… they are working well… i have 5 of these routers… they are working in a multihop configuration in a fashion shown below

    …………………………- router2 -……………………………………………………
    ………………………..-……………-…………………………………………………..
    ………………………-…………….. -………………………………………………..
    machine1____router1-…………….- router4 – – – – router5_____machine2
    ………………………-………………- ………………………………………………..
    ………………………..-……………-…………………………………………………..
    …………………………- router3 -……………………………………………………

    – – – – – – wireless connection
    _______ wired connection
    …………. Nothing

    now i m doing VoIP communication between machine 1 & 2 … it is working well… now one path is selected router 1-2-4-5 or from routers 1-3-4-5… if a switch off router 2 … the path shud immediately be selected as 1-3-4-5 but it takes a delay of almost 30 seconds which is bad for VoIP communication…
    Now can anybody please tell me how to reduce this delay??
    I tried to edit the olsrd.conf for reducing hello interval but with every reeboot the settings are gone… so no use… :(… i have selected channel 6….

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.