WRAP 1.0.9 + Soekris 4801 = EXTREMELY SLOW

Home Page Forums Network Management Embedded Devices WRAP 1.0.9 + Soekris 4801 = EXTREMELY SLOW

This topic contains 1 reply, has 0 voices, and was last updated by  csma-cd 10 years, 8 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #41067

    csma-cd
    Member

    Hello,

    While revamping my 4801 from openBSD to ZeroShell (got an Atheros card and the previous didnĀ“t recog’d it), I noted that it took almost an hour to boot from compactflash, the console screen was reduced to a single char at a time in the same place and no ETH came up with the default 192.168.0.75 address.

    Any clue???

    Best Regards,

    Fernando Augusto

    #46609

    imported_fulvio
    Participant

    Try with the serial port attached to a terminal.

    Regards
    Fulvio

    #46610

    csma-cd
    Member

    the console screen was reduced to a single char at a time in the same place

    That happened with the serial attached… And BTW, can’t it boot properly without a serial connected? I want that machine to be unnattended for long time….

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.