WLAN (WPA+PSK) dhcp server not working properly Home Page › Forums › Network Management › ZeroShell › WLAN (WPA+PSK) dhcp server not working properly This topic contains 1 reply, has 0 voices, and was last updated by ChillyWilly 10 years, 10 months ago. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts August 5, 2008 at 7:33 pm #41123 ChillyWillyMember WLAN clients can’t get an ip address when WPA security is enabled, plaintext (no security) works. Wifi card: Atheros AR5416 *edit: WEP works as well August 6, 2008 at 7:17 am #46734 ChillyWillyMember I think it’s a problem with the maturity of the madwifi driver. But there is good news. Atheros have released new linux drivers for there most recent wifi cards http://madwifi.org/wiki/news/20080725/ath9k-atheros-unveils-free-linux-driver-for The ath9k driver includes supports for the following chipsets: AR5418+AR5133 AR5416+AR5133 AR5416+AR2133 AR9160 AR9280 AR9281 Hope these will be incorporated in Zeroshell August 6, 2008 at 7:59 am #46735 imported_fulvioParticipant I think this new driver supports the new draft of 802.11n. I will try it as soon as possible and if it is mature I will integrate it. Regards Fulvio Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.