Windows Small Business Server 08 and Firewall Home Page › Forums › Network Management › Firewall, Traffic Shaping and Net Balancer › Windows Small Business Server 08 and Firewall This topic contains 3 replies, has 0 voices, and was last updated by pbowler 8 years, 7 months ago. Viewing 5 posts - 1 through 5 (of 5 total) Author Posts August 30, 2010 at 1:52 pm #42616 pbowlerMember Hello all, I am configuring Windows Small Business Server 08 behind a ZeroShell Router. In the course of one of Microsofts endless Wizards, it is trying to open ports on the Router. How do I allow Windows Server to configure the Router. and before you ask, I am a tech instructor and I need to use the wizards to make this happen becuase I have to teach it that way. thanks!!! August 31, 2010 at 6:51 am #51031 ppaliasMember In order to “open ports” on the router you have to go to “Network” -> “Router” -> “Virtual Server” and configure the ports you want to open towards the device you want. September 3, 2010 at 4:17 pm #51032 pbowlerMember I was able to do that manually, I wonder if there is a setting in ZerShell that will allow Windows Server to configure the router automatically (SNMP?) September 3, 2010 at 6:24 pm #51033 ppaliasMember You mean UPnP. This is not available in ZS. September 20, 2010 at 5:32 pm #51034 pbowlerMember Ah, OK thanks Author Posts Viewing 5 posts - 1 through 5 (of 5 total) You must be logged in to reply to this topic.