WAN Web Interface Access Question(s)

Home Page › Forums › Network Management › Networking › WAN Web Interface Access Question(s)

This topic contains 0 replies, has 0 voices, and was last updated by  matthew.a.squires 10 years, 6 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • July 3, 2008 at 1:50 pm #41075

    matthew.a.squires
    Member

    ISSUE: When I enable the remote Interface (add my WAN port to the HTTPS interface) it is displaying all of the Certificates.

    1Q: What is the process for stopping anyone from viewing and or downloading the Certificates?

    ISSUE: When I add the Captive Portal to the WAN interface, it blocks all packets from passing through the WAN port (unable to browse the internet).

    2Q: Do I get through the Captive Portal by adding the MAC/Physical addresses of each client to the Captive Portal (there are a lot of clients) or is their a workaround?

    July 3, 2008 at 8:13 pm #46624

    imported_fulvio
    Participant

    It is not possible to disable the certificate list.
    The captive portal works better on LAN Interfaces, but using the firewall you can try to enable the established connections.

    Fulvio
    Regards

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.