VPN routes pushed to OpenVPN clients?

Home Page › Forums › Network Management › Networking › VPN routes pushed to OpenVPN clients?

This topic contains 0 replies, has 0 voices, and was last updated by  jp10558 10 years, 5 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • August 21, 2008 at 3:40 pm #41152

    jp10558
    Member

    I know with straight OpenVPN you can create a server config file to push some settings down to the clients. I was wondering if it is possible to do something similar with ZeroShell?

    Specifically, I have a situation where I’ll need to add a bunch of single IP routes to go through the VPN to OpenVPN clients, but I don’t want all traffic going over the VPN if I can help it.

    August 21, 2008 at 7:25 pm #46823

    imported_fulvio
    Participant

    If you use the lastest release of Zeroshell (1.0.beta10), you have to click the button [Net] in the [VPN][Host-to-LAN (OpenVPN)] section of the web interface. You can add either single destination IP addresses or entire subnets to tunnel through the OpenVPN.
    The routes that you add will be pushed to the OpenVPN clients. I have tried it with Windows, Mac OS X and Linux client and it works fine.

    Regards
    Fulvio

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.