vpn on real ip-adresses

Home Page Forums Network Management ZeroShell vpn on real ip-adresses

This topic contains 2 replies, has 0 voices, and was last updated by  joar 11 years, 7 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #40726

    joar
    Member

    Hi
    How do I set up vpn client access to our network who have only “real” ip-adresses?

    #45736

    imported_fulvio
    Participant

    In the [VPN]->[Host-to-LAN] section you must configure a public IP range which is routed in your LAN. After that, select the Proxy Arp routing method. In this manner the Zeroshell host sends arp reply for any IP that belongs to the range you assigned.

    Regards
    Fulvio

    #45737

    joar
    Member

    Ok – in this scenario – can we use only one nic on the zeroshell box and point the clients to the same public ip on that same network as the ip range assigned to the clients?

    #45738

    imported_fulvio
    Participant

    I think you can, but I never tested this configuration. Please, let us know the result if you try it.

    Regards
    Fulvio

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.