VLAN on Captive Portal

Home Page Forums Network Management ZeroShell VLAN on Captive Portal

This topic contains 4 replies, has 0 voices, and was last updated by  brian 10 years, 1 month ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #40802

    brian
    Member

    Thank fulvio for his greate work.

    I have 3 vlans on a switch, which connected eth01 on ZeroShell with TRUNK mode.

    The DHCP with mutiple vlan is ok.

    Now only one vlan can. Others access public network directly.

    How to authenticate all vlans?

    #45944

    imported_fulvio
    Participant

    With the cuurent release of Zeroshell you can authenticate with the Captive Portal only 1 VLAN. In the near future I will make possibile to specify multi interface selection in the configuration of the captive gateway.

    Regards
    Fulvio

    #45945

    brian
    Member

    Thank u for your quik response

    #45946

    tirili
    Member

    In which release will this be possible ?
    In current beta.11 ?
    What is the current status ?

    Thanks for your reply.

    #45947

    imported_fulvio
    Participant

    The current release does not include the possibility to protect more than one interface with the captive portal.

    Regards
    Fulvio

    #45948

    ilNebbioso
    Participant

    Fulvio,
    is there any workaround for this scenario, maybe using the shell?

    As you know regarding Italian laws, here it is mandatory to use VLAN and protect them by Captive Portal.

    In case it is not possible, which release will have this option? How long must we wait for this?

    Thank you for your help and support.

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.