VLAN not working

Home Page Forums Network Management Networking VLAN not working

This topic contains 1 reply, has 0 voices, and was last updated by  hgfs 7 years, 6 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #43319

    hgfs
    Member

    I’m migrating from NuFirewall to ZeroShell.
    There is one problem: I don’t get any connection via VLAN.
    I’m using a Linksys WRT54GS with OpenWRT as a switch for one of my subnets (192.168.75.0/24) and as WLAN-AP for another subnet (192.168.76.0/24) via VLAN 2. The device is connected to ETH02 with IP 192.168.75.1. For ETH02 I have configured a VLAN 2 with IP 192.168.76.1. ZeroShell’s firewall is in the delivery state, to my understanding: accept all.
    I even can’t ping 192.168.76.1 from the WLAN.
    Due to the fact that the same configuration works with NuFirewall, I’m rather sure that the problem must be in my ZeroShell configuration.
    Where may be the problem?
    Is there anything more to configure to integrate a VLAN?

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.