Vlan Firewall Bandwidth rules

Home Page › Forums › Network Management › ZeroShell › Vlan Firewall Bandwidth rules

This topic contains 1 reply, has 0 voices, and was last updated by  gordon 9 years, 2 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 30, 2009 at 9:49 pm #42069

    gordon
    Member

    Hey guys,

    a while back i managed to get the firewall rules to do bandwidth control on each of my vlans. But i cant remember how and can’t seem to work it out. please help.

    Here’s the idea / setup

    Lan and VLANs on ETH00
    Wan on ETH01

    what i want to do is give
    vlan 11 2Mbps download and 256kbps upload on all ports
    vlan 12 4Mbps download and 512kbps upload on all ports
    vlan 13 10Mbps download and 2Mbps upload on all ports

    Also I need to stop vlan 11 being able to see vlan 12 and 13 and likewise the other way.

    Does that make sense??

    Regards

    Gordon

    December 1, 2009 at 12:51 pm #49177

    ppalias
    Member

    An easy way is to tag the traffic depending on the source interface. Then you can apply QoS on that or block the intervlan traffic with the firewall.

    December 4, 2009 at 11:22 am #49178

    gordon
    Member

    Thanks, can’t believe i didn’t think of that!!!!

    I remember on an older release have massive problems with qos on vlans – perhaps it wasn’t supported or perhaps i’ve learnt a thing or two since then.

    Cheers for the help.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.