virtual server = broken zeroshell Home Page › Forums › Network Management › ZeroShell › virtual server = broken zeroshell This topic contains 0 replies, has 0 voices, and was last updated by thistleknot 9 years, 2 months ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts November 26, 2009 at 1:50 am #42063 thistleknotMember I recreated zeroshell from scratch once. When I create a virtual server, it’s f’s my zeroshell. I can’t login to zeroshell, no internet connection. I’m using Release 1.0.beta12. I can ping the old ip, but I can’t login to it (i.e. zeroshell’s ip on my lan side) I basically created a rule as such ETH00 / ANY TCP/UDP 1-65535 192.168.3.14:58735 I have to enter failsafe, set the ip to my old ip I had, renew the dyn ip of the net side of the router, and it works again. What gives? If I reboot, I have to enter failsafe again. November 26, 2009 at 5:31 am #49159 thistleknotMember I was forwarding all ports to a single port. In effect routing all internet traffic to my azureus. I went and redid it and just forwarded one port. Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.