Using VPN on a specific Interface

Forums Network Management VPN Using VPN on a specific Interface

  • This topic is empty.
Viewing 1 post (of 1 total)
  • Author
  • #43361

    Hi all,

    i’m using Zeroshell with three WAN Cards, two LAN Cards, VPN and the NetBalancer.
    All works fine. Only the VPN Services makes troubles.

    I want to use Road Warrior Connections (UDP) only on ppp0.
    On the first time connecting after Reboot the tunnel is etablished. After a bit of time (~15 min) the tunnel crashes and no more connection can etablished.

    On the firewall logs i’ve found a service on UDP1194 (probably VPN) wich want to etablish a outgoing connection on ppp1/ppp2. Why? I’m still connecting to ppp0 from Road Warrior.

    The Interface Weights on Netbalancer are: ppp0=3, ppp1=1 ppp2=1
    Additionally there is a balancing rule to set the gateway for all outgoing connections on UDP1194 to ppp0.

    Can you help me please? I’m under timepressure.


    Sorry for my bad english

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.