Use Zeroshell with squid on another box

Home Page Forums Network Management ZeroShell Use Zeroshell with squid on another box

This topic contains 2 replies, has 0 voices, and was last updated by  rmarinho 9 years, 2 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #42303

    rmarinho
    Member

    Hi,

    We want to forward all http requests to squid box 192.168.9.4 (transparent mode) and then forward again to zeroshell 10.0.1.1.

    Does anyone have successfully config this? Please help! 😕

    Regards

    #49951

    ppalias
    Member

    You could do that with some custom iptables rules. In prerouting do a DNAT to 192.168.9.4 for packets matching destination tcp/80. On the squid box on the OUTPUT chain do a DNAT towards 10.0.1.1 for packets matching destination tcp/80 . Haven’t really tried it, but it should work.

    #49952

    rmarinho
    Member

    Hi,

    At zeroshell I need to use web GUI or ssh?

    Sorry but I’m not very familiarized with advanced zeroshell configuration.

    Regards

    #49953

    ppalias
    Member

    You may add the rules directly on the PreBoot/PostBoot page of the WebGUI. However if you haven’t tested them before this is not adviseable.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.