UMTS options

Home Page Forums Network Management ZeroShell UMTS options

This topic contains 1 reply, has 0 voices, and was last updated by  dimi3 10 years, 2 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #41330

    dimi3
    Member

    Hi,

    I have setup alix board with huawei E220 modem and its detected perfectly. I’m unable to connect at the moment, because I don’t have any option to enter username and password for the ppp connection? (Within the GUI), my GSM provider requires username and password. 😡

    Is there a possibility to implement also username and password in the GUI? or is there a possibility to enter it in some config file?

    Thanks for your support.

    #47229

    jstrebel
    Member

    dimi,

    did you try to send only the PIN code in the Optional AT string?
    “AT+CPIN=xxxxx”
    (the individual APN names for your provider you might get searching with google)
    If you need mor help, it might be helpful if you tell us which provider you are using.

    jakob

    #47230

    dimi3
    Member

    hi,

    thanks for the input, but I dont have PIN enabled on the SIM card. So this wount help me.

    I have the correct APN settings, everything works,except autentication, since I dont have any username and password configured. And I dont know where to configure it.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.