two bridges in the same zeroshell box

Home Page Forums Network Management ZeroShell two bridges in the same zeroshell box

This topic contains 3 replies, has 0 voices, and was last updated by  fabquinteros 10 years, 9 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #41366

    fabquinteros
    Member

    Fulvio,

    I’m ISP and have two carriers internet. I can deal with two bridges and assign different QOS queues at each bridge? would like to filter? in or out by (name of the bridge)

    or do I have to use two zero boxs.

    thanks for your excellent work!!

    #47289

    imported_fulvio
    Participant

    Zeroshell supports multi-bridge with separated QoS policy.

    Regards
    Fulvio

    #47290

    fabquinteros
    Member

    ok, but in the classifier, would have to filter by bridge00 or bridge01 in Packet
    Matching the field IN? and so could involve different classes for each bridge?

    thanks again!!

    #47291

    imported_fulvio
    Participant

    You have to add the class to the bridged interfaces (ETH00, …) and not to the bridge interfaces (BRIDGE00, …). The same thing is valid in the classifier.

    #47292

    fabquinteros
    Member

    Fulvio,

    then in this scheme, should be 4 per protocol rules requiring Match?
    to be able to send it to the appropriate class

    thank you very much!

              my router
    (routing policy based) T
    router ISP1 O
    ______ __________
    ___________ eth00| |eth01 | |
    to | |
    | BR00 |
    |__________|----> I
    customer net | Linux | | | N
    <
    | router | | | __________ T
    | | eth02| |eth03 | | E
    |___________|
    | BR01 |
    |__________|----> R
    |______| N
    router ISP2 E
    T

    Calssifier

    Seq Input Output Description QoS Class Log Active

    1 eth00 * MARK all opt — in * out * 0.0.0.0/0 -> 0.0.0.0/0 LAYER7 l7proto http MARK set 0x12 WEB_ISP1 no
    2 eth01 * MARK all opt — in * out * 0.0.0.0/0 -> 0.0.0.0/0 LAYER7 l7proto http MARK set 0x12 WEB_ISP1 no

    3 eth02 * MARK all opt — in * out * 0.0.0.0/0 -> 0.0.0.0/0 LAYER7 l7proto http MARK set 0xb WEB_ISP2 no
    4 eth03 * MARK all opt — in * out * 0.0.0.0/0 -> 0.0.0.0/0 LAYER7 l7proto http MARK set 0xb WEB_ISP2 no

    Rules 2 and 4 are for returning the packages, or connections to the network client

    Viewing 5 posts - 1 through 5 (of 5 total)

    You must be logged in to reply to this topic.