TWO 3G USB MODEM NO TTY CREATE FOR THE SECOND

Home Page Forums Network Management ZeroShell TWO 3G USB MODEM NO TTY CREATE FOR THE SECOND

This topic contains 10 replies, has 0 voices, and was last updated by  idinfo 6 years, 8 months ago.

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #42431

    idinfo
    Member

    Hi, I setup the system with two 3G usb modem, when I put one of the two modem, it’s ok, the system creat ttyUSB0 to 2. But when I put the two modem, one of the modem don’t receive ttyUSB assign, I only can work with one. How to do ? Need Help. thanks.

    #50401

    ppalias
    Member

    Log in to the shell with ssh and issue the commands

    dmesg
    lsusb
    lsmod
    ifconfig -a

    Paste the output here.

    #50402

    idinfo
    Member

    Log Kernel
    11:55:10 uhci_hcd 0000:00:07.2: UHCI Host Controller
    11:55:10 uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    11:55:10 uhci_hcd 0000:00:07.2: irq 10, io base 0x0000e400
    11:55:10 usb usb1: configuration #1 chosen from 1 choice
    11:55:10 hub 1-0:1.0: USB hub found
    11:55:10 hub 1-0:1.0: 2 ports detected
    11:55:10 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
    11:55:10 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    11:55:10 usb usb1: Product: UHCI Host Controller
    11:55:10 usb usb1: Manufacturer: Linux 2.6.25.20 uhci_hcd
    11:55:10 usb usb1: SerialNumber: 0000:00:07.2
    11:55:10 No dock devices found.
    11:55:10 libata version 3.00 loaded.
    11:55:10 usb 1-1: new full speed USB device using uhci_hcd and address 2
    11:55:10 usb 1-1: configuration #1 chosen from 1 choice
    11:55:10 usb 1-1: New USB device found, idVendor=16d8, idProduct=6006
    11:55:10 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    11:55:10 usb 1-1: Product:
    11:55:10 usb 1-1: Manufacturer:
    11:55:10 usb 1-2: new full speed USB device using uhci_hcd and address 3
    11:55:10 Initializing USB Mass Storage driver…
    11:55:10 usb 1-2: configuration #1 chosen from 1 choice
    11:55:10 usb 1-2: New USB device found, idVendor=0af0, idProduct=6971
    11:55:10 usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
    11:55:10 usb 1-2: Product: Globetrotter HSDPA Modem
    11:55:10 usb 1-2: Manufacturer: Option N.V.
    11:55:10 usb 1-2: SerialNumber: Serial Number
    11:55:10 scsi0 : SCSI emulation for USB Mass Storage devices
    11:55:10 usb-storage: device found at 2
    11:55:10 usb-storage: waiting for device to settle before scanning
    11:55:10 scsi1 : SCSI emulation for USB Mass Storage devices
    11:55:10 usbcore: registered new interface driver usb-storage
    11:55:10 USB Mass Storage support registered.
    11:55:10 usb-storage: device found at 2
    11:55:10 usb-storage: waiting for device to settle before scanning
    11:55:10 usbcore: registered new interface driver ub
    11:55:10 scsi 0:0:0:0: CD-ROM Mass Storage 2.31 PQ: 0 ANSI: 0 CCS
    11:55:10 scsi 0:0:0:0: Attached scsi generic sg0 type 5
    11:55:10 usb-storage: device scan complete
    11:55:10 scsi 1:0:0:0: Direct-Access Mass Storage 2.31 PQ: 0 ANSI: 6
    11:55:10 Driver ‘sr’ needs updating – please use bus_type methods
    11:55:10 sr0: scsi3-mmc drive: 0x/0x caddy
    11:55:10 sd 1:0:0:0: [sda] 81921 512-byte hardware sectors (42 MB)
    11:55:10 sd 1:0:0:0: [sda] Write Protect is off
    11:55:10 sd 1:0:0:0: [sda] Mode Sense: 0b 00 00 08
    11:55:10 sd 1:0:0:0: [sda] Assuming drive cache: write through
    11:55:10 sr 0:0:0:0: Attached scsi CD-ROM sr0
    11:55:10 sd 1:0:0:0: [sda] 81921 512-byte hardware sectors (42 MB)
    11:55:10 sd 1:0:0:0: [sda] Write Protect is off
    11:55:10 sd 1:0:0:0: [sda] Mode Sense: 0b 00 00 08
    11:55:10 sd 1:0:0:0: [sda] Assuming drive cache: write through
    11:55:10 sda: unknown partition table
    11:55:10 sd 1:0:0:0: [sda] Attached SCSI removable disk
    11:55:10 sd 1:0:0:0: Attached scsi generic sg1 type 0
    11:55:10 usb-storage: device scan complete
    11:55:10 FAT: bogus number of reserved sectors
    11:55:10 VFS: Can’t find a valid FAT filesystem on dev hda3.
    11:55:10 kjournald starting. Commit interval 5 seconds
    11:55:10 EXT3-fs: mounted filesystem with ordered data mode.
    11:55:10 FAT: bogus number of reserved sectors
    11:55:10 VFS: Can’t find a valid FAT filesystem on dev sda.
    11:55:10 FAT: bogus number of reserved sectors
    11:55:10 VFS: Can’t find a valid FAT filesystem on dev sda.
    11:55:10 FAT: bogus number of reserved sectors
    11:55:10 VFS: Can’t find a valid FAT filesystem on dev hda3.
    11:55:10 kjournald starting. Commit interval 5 seconds
    11:55:10 EXT3-fs warning: checktime reached, running e2fsck is recommended
    11:55:10 EXT3 FS on hda3, internal journal
    11:55:10 EXT3-fs: mounted filesystem with ordered data mode.
    11:55:10 Adding 131064k swap on /DB/swap-file. Priority:-1 extents:34 across:133244k
    11:55:10 warning: `named’ uses 32-bit capabilities (legacy support in use)
    11:55:10 nf_conntrack version 0.5.0 (65536 buckets, 524288 max)
    11:55:17 ip_tables: (C) 2000-2006 Netfilter Core Team
    11:55:19 Bridge firewalling registered
    11:55:19 DEFAULTBR: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
    11:55:19 tun: Universal TUN/TAP device driver, 1.6
    11:55:19 tun: (C) 1999-2004 Max Krasnyansky
    11:55:19 wlan: 0.9.4
    11:55:19 ath_hal: module license ‘Proprietary’ taints kernel.
    11:55:19 ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
    11:55:19 ath_rate_sample: 1.2 (0.9.4)
    11:55:19 ath_pci: 0.9.4
    11:55:19 ath_pci: driver unloaded
    11:55:19 ath_rate_sample: unloaded
    11:55:20 ath_hal: driver unloaded
    11:55:20 wlan: driver unloaded
    11:55:20 ETH00: link up, 100Mbps, full-duplex, lpa 0x45E1
    12:49:12 usbcore: registered new interface driver usbserial
    12:49:12 drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
    12:49:12 usbserial_generic 1-1:1.0: generic converter detected
    12:49:12 usb 1-1: generic converter now attached to ttyUSB0
    12:49:12 usbserial_generic 1-1:1.1: generic converter detected
    12:49:12 usb 1-1: generic converter now attached to ttyUSB1
    12:49:12 usbserial_generic 1-1:1.2: generic converter detected
    12:49:12 usb 1-1: generic converter now attached to ttyUSB2
    12:49:12 usbcore: registered new interface driver usbserial_generic
    12:49:12 drivers/usb/serial/usb-serial.c: USB Serial Driver core
    12:55:37 PPP generic driver version 2.4.2
    12:55:40 PPP BSD Compression module registered
    12:55:40 PPP Deflate Compression module registered

    root@zeroshell etc> lsusb
    Unknown line at line 1809
    Duplicate HUT Usage Spec at line 2650
    Bus 001 Device 003: ID 0af0:6971
    Bus 001 Device 002: ID 16d8:6006
    Bus 001 Device 001: ID 1d6b:0001

    root@zeroshell etc> lsmod
    Module Size Used by
    ppp_deflate 7936 0
    bsd_comp 8064 0
    ppp_async 14080 1
    crc_ccitt 3968 1 ppp_async
    ppp_generic 31004 7 ppp_deflate,bsd_comp,ppp_async
    slhc 8576 1 ppp_generic
    ipt_MASQUERADE 5632 2
    usbserial 36968 3
    dummy1 5376 0
    xt_CONNMARK 5760 1
    tun 13696 0
    bridge 57752 0
    llc 9228 1 bridge
    iptable_nat 9224 1
    xt_state 4352 4
    xt_tcpudp 4992 11
    iptable_mangle 5248 1
    iptable_filter 5376 1
    ip_tables 16144 3 iptable_nat,iptable_mangle,iptable_filter
    x_tables 19076 6 ipt_MASQUERADE,xt_CONNMARK,iptable_nat,xt_state,xt_tcpudp,ip_tables
    nf_nat_pptp 5632 0
    nf_nat_proto_gre 4740 1 nf_nat_pptp
    nf_nat_ftp 5248 0
    nf_nat 21656 5 ipt_MASQUERADE,iptable_nat,nf_nat_pptp,nf_nat_proto_gre,nf_nat_ftp
    nf_conntrack_ipv4 19720 8 iptable_nat,nf_nat
    nf_conntrack_tftp 7060 0
    nf_conntrack_pptp 8964 1 nf_nat_pptp
    nf_conntrack_proto_gre 8064 1 nf_conntrack_pptp
    nf_conntrack_irc 8604 0
    nf_conntrack_sip 11156 0
    nf_conntrack_ftp 11300 1 nf_nat_ftp
    nf_conntrack_h323 51912 0
    nf_conntrack 67668 15 ipt_MASQUERADE,xt_CONNMARK,iptable_nat,xt_state,nf_nat_pptp,nf_nat_ftp,nf_nat,nf_conntrack_ipv4,nf_conntrack_tftp,nf_conntrack_pptp,nf_conntrack_proto_gre,nf_conntrack_irc,nf_conntrack_sip,nf_conntrack_ftp,nf_conntrack_h323
    dummy 5376 0
    vfat 14976 0
    fat 54432 1 vfat
    sr_mod 18628 0
    ub 22328 0
    usb_storage 88768 0
    ata_generic 10244 0
    pata_via 13572 0
    libata 165192 2 ata_generic,pata_via
    dock 12304 1 libata
    uhci_hcd 26892 0
    via_rhine 27144 0
    loop 20100 1

    root@zeroshell etc> ifconfig -a
    DEFAULTBR Link encap:Ethernet HWaddr E6:64:BB:A5:A9:B5
    BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

    ETH00 Link encap:Ethernet HWaddr 00:50:BA:C5:6B:11
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:8796 errors:0 dropped:0 overruns:0 frame:0
    TX packets:11958 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:780048 (761.7 Kb) TX bytes:2456065 (2.3 Mb)
    Interrupt:10 Base address:0x8000

    ETH00:00 Link encap:Ethernet HWaddr 00:50:BA:C5:6B:11
    inet addr:192.168.6.199 Bcast:192.168.6.255 Mask:255.255.255.0
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    Interrupt:10 Base address:0x8000

    VPN99 Link encap:Ethernet HWaddr 00:FF:47:1E:4D:23
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

    VPN99:00 Link encap:Ethernet HWaddr 00:FF:47:1E:4D:23
    inet addr:192.168.250.254 Bcast:192.168.250.255 Mask:255.255.255.0
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

    dummy0 Link encap:Ethernet HWaddr 8A:08:2B:1E:94:6B
    inet addr:192.168.141.142 Bcast:192.168.141.255 Mask:255.255.255.0
    BROADCAST NOARP MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

    dummy1 Link encap:Ethernet HWaddr FA:FC:74:C9:66:1E
    inet addr:192.168.142.142 Bcast:192.168.142.255 Mask:255.255.255.255
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:196 errors:0 dropped:0 overruns:0 frame:0
    TX packets:196 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:23014 (22.4 Kb) TX bytes:23014 (22.4 Kb)

    ppp0 Link encap:Point-to-Point Protocol
    inet addr:172.27.12.17 P-t-P:10.64.64.64 Mask:255.255.255.255
    UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
    RX packets:27 errors:0 dropped:0 overruns:0 frame:0
    TX packets:29 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:3
    RX bytes:3773 (3.6 Kb) TX bytes:1528 (1.4 Kb)

    Thanks

    #50403

    ppalias
    Member

    Looks like the USB dongle has been discovered as a USB mass storage device. Usually they do that for windows, so that you can access the storage first, install the driver and after that they appear as network devices. I think I had read a solution for that somewhere, but I cannot find it. I suppose those 2 dongles are not the same right?

    #50404

    idinfo
    Member

    Hi, they are 2 different 3G modem, when I have this result:
    Bus 001 Device 003: ID 0af0:6971
    Bus 001 Device 002: ID 16d8:6006
    If I make first the modprobe usbserial for 6971, is ok I can use it, create the tty.
    If I make first the 6006 create tty. But I need the two modem.

    Do you have and idea ?

    #50405

    ppalias
    Member

    I didn’t understand your last post.

    #50406

    idinfo
    Member

    I want tell you:
    One 3g modem is a option 225 when you do lsusb it’s this one:
    Bus 001 Device 003: ID 0af0:6971, to create the ttyUSB0,1,2, the command is modprobe usbserial vendor=0x0af0 product=0x6971

    The other is a XS Stick W12 4G, the lsusb is:
    Bus 001 Device 002: ID 16d8:6006
    After I make the command modprobe usbserial vendor=0x16d8 product=0x6006, but no more ttyUSB are create.

    If I make the command first for the XS Stick, the ttyUSB are create.
    With that I can say for the two modem, they are see for the system as really modem.
    Regards

    #50407

    ppalias
    Member

    Maybe if you didn’t specify the vendor and the product at the modprobe line, would that help?

    #50408

    idinfo
    Member

    Hi, same result !

    #50409

    ppalias
    Member

    Unfortunately I am not sure how to help you more on that. Maybe Fulvio could show a way to load multiple devices with the same module.

    #50410

    idinfo
    Member

    Ok thanks, I hope have solution.

    #50411

    bungjoe
    Member

    is there any solution to this?

    sorry to revive an old thread back

Viewing 12 posts - 1 through 12 (of 12 total)

You must be logged in to reply to this topic.