traffic shaping is defect

Home Page › Forums › Network Management › Signal a BUG › traffic shaping is defect

This topic contains 0 replies, has 0 voices, and was last updated by  pidda 3 years, 5 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • June 15, 2016 at 12:04 pm #44578

    pidda
    Member

    Hello,

    on a classic VIA-board with ZS 3.5.0 traffic shaping is defect.

    I tried speedtest-cli.py on my box behind ZS:

    Retrieving speedtest.net configuration…
    Retrieving speedtest.net server list…
    Testing from Telefonica Germany ()…
    Selecting best server based on latency…
    Hosted by SoftLayer Technologies, Inc. (Frankfurt) [40.30 km]: 45.616 ms
    Testing download speed………………………………….
    Download: 9.37 Mbit/s
    Testing upload speed…………………………………………..
    Upload: 0.94 Mbit/s

    Thats ok and the corresponding traffic was seen in QoS/Statistics default.

    Now i want shape the traffic from and to my destops ip in a way that during downloads not the whole bandwith is consumed.

    For my surprise the traffic goes through default and not through the defined class and is throttled down to ~250 KB/sec.
    This happens for wget, curl, ftp and ssh.

    Has anybody any idea what is going wrong and possibly a solution?

    Regards
    Pidda

    June 17, 2016 at 8:35 am #54169

    pidda
    Member

    SOLVED!

    The expansion board with three REALTEK nic’s caused the problems.

    Configuring the onboard VIA nic as input and only using one nic from expansion board
    solved the issue. All works like a charme.

    Regards
    Peter

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.